Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement Caterpillar

Installation Procedure

Show/hide table



Illustration 1	g00611429

1. Check gasket (13) for wear or damage. Replace the gasket, if necessary.

2. Apply 5P-3931 Anti-Seize Compound to the threads of the mounting studs for the turbocharger and to the locknuts.

3. Position gasket (13) and turbocharger (14) onto the exhaust manifold. Install four locknuts (12). Tighten the locknuts to a torque of 54 ± 5 N·m (40 ± 4 lb ft).

Show/hide table



Illustration 2	g00611431

Show/hide table



Illustration 3	g00611433

4. Check oil drain tube (10) and the O-ring seals for wear or damage. Replace the parts, if necessary.

5. Install drain tube (10) and adapter (11) .

6. Check the gasket and the O-ring seal for wear or damage. This gasket is used on the oil supply tube. Replace the seals, if necessary.

7. Install oil supply tube (7), the gasket, and the O-ring seal.

Show/hide table



Illustration 4	g00611434

8. Install tube (6) and tighten clamps (4) and (5) .

Show/hide table



Illustration 5	g00611436

Show/hide table



Illustration 6	g00611437

9. Install air intake hose (2). Connect support bracket (3) and tighten clamp (1) .

End By: Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".