D250E Series II and D300E Series II Articulated Trucks Caterpillar


Hood Latch Control

Usage:

D250E II 4PS



Illustration 1g00605122

The control (handle) for the hood latch is located under the dash panel. Pull the handle in order to release the hood latch.




Illustration 2g00631490

Use handle (1) to fully raise the hood. The hood will lock in the fully raised position.

Pull handle (2) in order to release the hood. Use handle (1) to fully lower the hood as you pull handle (2). You should release handle (2) once the hood starts to lower. The hood latch will engage when the hood is closed. Make sure that the hood is fully closed and secure.

Caterpillar Information System:

3406C Engines for Caterpillar Built Machines Cylinder Head
D250E Series II and D300E Series II Articulated Trucks Hoist Control
AP-1000B and BG-260C Asphalt Pavers Drag Conveyors - Lubricate
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Counterweight-Adjusting Machine Balance
D250E Series II and D300E Series II Articulated Trucks Steering Column Tilt and Telescope Control
D250E Series II and D300E Series II Articulated Trucks Steering Control
AP-1055B and BG-2455C Asphalt Pavers Cooling System Water Temperature Regulator - Replace
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Conveyor Planetary Drive (Auger) Oil Sample - Obtain
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Conveyor Planetary Drive (Auger) Oil - Change
D250E Series II and D300E Series II Articulated Trucks Differential Lock Control
D250E Series II and D300E Series II Articulated Trucks Transmission Control
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Conveyor Planetary Drive (Auger) Oil Level - Check
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Mounted Chemical Tanks
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Cab - Install
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Radiator - Assemble
D250E Series II and D300E Series II Articulated Trucks Machine Operation Information
Electronic Modular Control Panel II (EMCP II) For MUI Engines Block Diagram of Generator Set Control
D250E Series II and D300E Series II Articulated Trucks Secondary Steering
D250E Series II and D300E Series II Articulated Trucks Changing Speed and Direction
D250E Series II and D300E Series II Articulated Trucks Braking Operation
D250E Series II and D300E Series II Articulated Trucks Retarder
D250E Series II and D300E Series II Articulated Trucks Differential Lock
725C2 Articulated Truck Tailgate
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Truck Payload System (TPS) General Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.