Machine Operation Information
To prevent injury, make sure that no people are on the machine or near the machine. To prevent injury, keep the machine under control at all times.
Move the hoist control to the FLOAT position. The transmission will not upshift if the hoist control is not in the FLOAT position.
Reduce engine speed when you maneuver in confined spaces or when you drive over a hill.
Select the appropriate travel speed before you drive the machine downhill. Do not shift the transmission control while you drive downhill.
When you drive the machine downhill, use the same gear that would be used to drive the machine uphill.
Do not allow the engine to overspeed when you drive the machine downhill. Use the retarder control and the service brake control to prevent engine overspeed when you are going downhill.
- Check for adequate clearance around the machine.
- Press the service brake control in order to prevent the machine from moving.
- Move the parking and secondary brake control to the DISENGAGED position.
- Press the transmission neutral lock switch and move the transmission control in order to select the desired speed and desired direction.
- Release the service brake control.
- Press the accelerator control so that the machine moves smoothly.
Caterpillar Information System:
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Radiator - Assemble
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Cab - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Mounted Chemical Tanks
D250E Series II and D300E Series II Articulated Trucks Hood Latch Control
3406C Engines for Caterpillar Built Machines Cylinder Head
D250E Series II and D300E Series II Articulated Trucks Hoist Control
AP-1000B and BG-260C Asphalt Pavers Drag Conveyors - Lubricate
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Counterweight-Adjusting Machine Balance
D250E Series II and D300E Series II Articulated Trucks Steering Column Tilt and Telescope Control
D250E Series II and D300E Series II Articulated Trucks Steering Control
AP-1055B and BG-2455C Asphalt Pavers Cooling System Water Temperature Regulator - Replace
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Conveyor Planetary Drive (Auger) Oil Sample - Obtain
Electronic Modular Control Panel II (EMCP II) For MUI Engines Block Diagram of Generator Set Control
D250E Series II and D300E Series II Articulated Trucks Secondary Steering
D250E Series II and D300E Series II Articulated Trucks Changing Speed and Direction
D250E Series II and D300E Series II Articulated Trucks Braking Operation
D250E Series II and D300E Series II Articulated Trucks Retarder
D250E Series II and D300E Series II Articulated Trucks Differential Lock
725C2 Articulated Truck Tailgate
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Truck Payload System (TPS) General Information
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Off-Board Features
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS On-Board Features
3406C Engines for Caterpillar Built Machines Exhaust Manifold
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) TPS Component Function