Show/hide table
|
|
|
Illustration 1 | g00605115 |
Show/hide table
|
NOTICE |
The body must be lowered to the frame and the hoist control lever must be in the FLOAT position when driving the machine. If the hoist control lever is in any position except FLOAT, the transmission will remain in FIRST gear. Normal gear shifting will not take place until the hoist control is moved to the FLOAT position. |
|
Show/hide table
| RAISE (1) - Move the hoist control lever to the RAISE position in order to raise the body. Hold the hoist control lever fully back for maximum speed. Reduce hand force on the hoist control lever in order to reduce the speed. Hold the hoist control lever until the body is raised. Release the hoist control lever when the body is raised. The hoist control lever will return to the HOLD position. |
Show/hide table
| HOLD (2) - Move the hoist control lever to the HOLD Position in order to hold the body. The body is held in position by the hoist cylinders. |
Show/hide table
| FLOAT (3) - Move the hoist control lever to the FLOAT position in order to allow the body to float. |
Show/hide table
| LOWER (4) - Move the hoist control lever to the LOWER position in order to lower the body. Push the hoist control lever fully forward for maximum speed. Reduce hand force on the hoist control lever in order to reduce the speed. Hold the hoist control lever until the body is approximately 600 mm (24 inch) above the rear frame. Release the hoist control lever. The hoist control lever will return to the FLOAT position. The body will continue to lower under the effect of gravity until the body rests on the frame. |
The hoist control lever must be in the FLOAT position before the engine start switch is turned off. If the hoist control lever is not in the FLOAT position and the engine is turned off, the system must be reset. Reset the system by moving the hoist control to the HOLD position then to the FLOAT position.
If the machine is equipped with a tailgate, the tailgate will open automatically.
When the hoist control lever is in the RAISE position, the tailgate will open as the body is raised.
When the hoist control lever is in the LOWER position, the tailgate will close as the body lowers.