D250E Series II and D300E Series II Articulated Trucks Caterpillar


Steering Control

Usage:

D250E II 4PS



Illustration 1g00603552

The machine's directional steering is controlled by the steering wheel. The machine will turn in the same direction as the steering wheel is turned.

Left Turn - Move the steering wheel in a counterclockwise direction in order to steer the machine to the left.

Right Turn - Move the steering wheel in a clockwise direction in order to steer the machine to the right.

Turn the steering wheel slowly in order to make a slow turn.

Turn the steering wheel faster in order to make a sharp turn. An increase in resistance will be felt if the operator turns the steering wheel faster than the maximum speed of response. This is a characteristic of the system. This does not indicate a fault.

Caterpillar Information System:

AP-1055B and BG-2455C Asphalt Pavers Cooling System Water Temperature Regulator - Replace
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Conveyor Planetary Drive (Auger) Oil Sample - Obtain
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Conveyor Planetary Drive (Auger) Oil - Change
D250E Series II and D300E Series II Articulated Trucks Differential Lock Control
D250E Series II and D300E Series II Articulated Trucks Transmission Control
Caterpillar<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> AP-650B and Barber-Greene<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> BG-225C Asphalt Pavers Conveyor Planetary Drive (Auger) Oil Level - Check
24H Motor Grader Transmission Electronic Control System And Hydraulic Calibrations Diagnostic Operation
3306C Engines for Caterpillar Built Machines Governor
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Starting Below 0&deg;C (32&deg;F)
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Piston Pump (Hydrostatic) - Assemble
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Quick Hitch
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Attaching and Detaching Three-Point Implements
D250E Series II and D300E Series II Articulated Trucks Steering Column Tilt and Telescope Control
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Counterweight-Adjusting Machine Balance
AP-1000B and BG-260C Asphalt Pavers Drag Conveyors - Lubricate
D250E Series II and D300E Series II Articulated Trucks Hoist Control
3406C Engines for Caterpillar Built Machines Cylinder Head
D250E Series II and D300E Series II Articulated Trucks Hood Latch Control
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Machine Mounted Chemical Tanks
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Cab - Install
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Radiator - Assemble
D250E Series II and D300E Series II Articulated Trucks Machine Operation Information
Electronic Modular Control Panel II (EMCP II) For MUI Engines Block Diagram of Generator Set Control
D250E Series II and D300E Series II Articulated Trucks Secondary Steering
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.