Double Check Valve (Service and Secondary Brake) - Remove and Install
Removal Procedure
Start By:
- Remove the front compartment cover of the cab. Refer to Disassembly and Assembly, "Cover (Cab Front) - Remove and Install" for the correct procedure.
Show/hide table
In order to prevent possible personal injury, release the air pressure from the air tank before disconnecting any components of the air system. |
- Release the air pressure in the air tank.
Show/hide table
Illustration 1 | g00427798 |
- Disconnect hose assembly (2) .
Note: Identify the hose assemblies for correct installation purposes.
- Remove hose assembly (8) .
- Disconnect hose assembly (4) .
- Remove elbow (1) and elbow (3) .
- Remove bolt (6), the washer, and clip (7) .
- Remove double check valve (5) .
Installation Procedure
Note: Use 5P-3413 Pipe Sealant during the assembly of the pipe plugs, the nipples, and the fittings.
- Install double check valve (5) .
Show/hide table
Illustration 2 | g00427798 |
- Install clip (7), the washer, and bolt (6) .
- Install elbow (3) and elbow (1) .
- Connect hose assembly (4) .
- Install hose assembly (8) .
- Connect hose assembly (2) .
End By:
- Refer to Operation and Maintenance Manual, "Starting with an External Air Supply" in order to refill the air tank.
- Install the front compartment cover of the cab. Refer to Disassembly and Assembly, "Cover (Cab Front) - Remove and Install" for the correct procedure.
Caterpillar Information System:
3126E and 3126B Commercial and Truck Engines Belt Tensioner - Inspect - If Equipped
793C Off-Highway Truck Machine Systems Double Check Valve (Retarder Control) - Remove and Install
3034 Engine for Caterpillar Built Machines Flywheel
527 Track-Type Skidder Power Train Resonator
527 Track-Type Skidder Power Train Track Idler
517 Track-Type Skidder Power Train Track Roller
527 Track-Type Skidder Power Train Pivot Shaft
517 Track-Type Skidder Power Train Equalizer Bar
527 Track-Type Skidder Power Train Track Roller Frame
517 Track-Type Skidder Power Train Undercarriage
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Flywheel
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Quick Coupler - Remove and Install
793B Off-Highway Truck Steering System Solenoid Valve (Steering)
793C Off-Highway Truck Machine Systems Double Check Valve - Disassemble
793C Off-Highway Truck Machine Systems Double Check Valve - Assemble
793C Off-Highway Truck Machine Systems Double Check Valve (Front Air over Hydraulic Cylinder) - Remove and Install
793C Off-Highway Truck Machine Systems Double Check Valve (Rear Air over Hydraulic Cylinder) - Remove and Install
DASA 280 Measuring and Control System Programming Variables
572R Pipelayer Hook Load Line - Install
3176C and 3196 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzles
DASA 280 Measuring and Control System Setting Module
572R Pipelayer Boom Line - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Coupler Cylinder - Remove