 | |
| Illustration 1 | g00425758 |
Equalizer Bar Assembly (1) Equalizer bar (2) Pin | |
 | |
| Illustration 2 | g00425759 |
Section A-A (1) Equalizer bar (5) Bearing (6) Main frame (7) Pin (8) Seal | |
 | |
| Illustration 3 | g00425762 |
Section C-C (1) Equalizer bar (2) Pin (3) Spherical bearing (4) Seals | |
Roller frames are connected together at the front of the machine by equalizer bar (1) . Spherical bearing (3) is installed in both ends of the equalizer bar. Pins (2) connect the equalizer bar to the roller frames. Seals (4) keep foreign material out of the bearings.
A powdered metal bearing (5) is pressed into the center bore of the equalizer bar. Pin (7) connects the equalizer bar to the main frame of the machine. Seals (8) keep foreign material out of the bearing.
The equalizer bar pivots on pin (7) . Stops in the saddle for the equalizer bar control the amount of oscillation of the equalizer bar.