Double Check Valve - Assemble
Assembly Procedure
- Install shuttle (3) .
Show/hide table
Illustration 1 | g00567588 |
Show/hide table
Illustration 2 | g00567589 |
- Install guide (4) .
- Install base (5) and O-ring seal (7) on body (2) .
Note: Inspect the O-ring seal. Replace the O-ring seal if the seal is worn or damaged.
Note: Before installation, apply 1U-6396 O-Ring Assembly Compound to the O-ring seal.
- Install one washer (9), one tag (6), and two bolts (8) .
End By: Install the double check valve (service and secondary brake). Refer to Disassembly and Assembly, "Double Check Valve (Service and Secondary Brake) - Remove and Install" for the correct procedure.
Caterpillar Information System:
793C Off-Highway Truck Machine Systems Double Check Valve - Disassemble
793B Off-Highway Truck Steering System Solenoid Valve (Steering)
793C Off-Highway Truck Machine Systems Double Check Valve (Service and Secondary Brake) - Remove and Install
3126E and 3126B Commercial and Truck Engines Belt Tensioner - Inspect - If Equipped
793C Off-Highway Truck Machine Systems Double Check Valve (Retarder Control) - Remove and Install
3034 Engine for Caterpillar Built Machines Flywheel
527 Track-Type Skidder Power Train Resonator
527 Track-Type Skidder Power Train Track Idler
517 Track-Type Skidder Power Train Track Roller
527 Track-Type Skidder Power Train Pivot Shaft
517 Track-Type Skidder Power Train Equalizer Bar
527 Track-Type Skidder Power Train Track Roller Frame
793C Off-Highway Truck Machine Systems Double Check Valve (Front Air over Hydraulic Cylinder) - Remove and Install
793C Off-Highway Truck Machine Systems Double Check Valve (Rear Air over Hydraulic Cylinder) - Remove and Install
DASA 280 Measuring and Control System Programming Variables
572R Pipelayer Hook Load Line - Install
3176C and 3196 Engines for Caterpillar Built Machines Rear Power Take-Off (RPTO)
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Nozzles
DASA 280 Measuring and Control System Setting Module
572R Pipelayer Boom Line - Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Coupler Cylinder - Remove
793C Off-Highway Truck Machine Systems Hoist and Brake Hydraulic Breather - Remove and Install
784C and 785C Off-Highway Truck/Tractors Steering System Oil Filter - Replace
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Fuel Injection Pump