Track Idler
Show/hide table
 | |
| Illustration 1 | g00426399 |
Idlers (1) Pin. (2) Retainer. (3) Shaft. (4) Idler. (5) Washer. (6) Duo-Cone seal. | |
The tractor has a front idler and a rear idler for each roller frame. The idler components are similar to the track rollers.
Washers (5) take on the side load on the idler. The amount of side movement or of end clearance of the shaft can not be adjusted.
Idler (4) has Duo-Cone seals (6) at both ends of shaft (3) .
The center of shaft (3) is an oil reservoir. The oil is used for lubrication of the bearing surfaces.
Caterpillar Information System:
517 Track-Type Skidder Power Train Track Roller
527 Track-Type Skidder Power Train Pivot Shaft
517 Track-Type Skidder Power Train Equalizer Bar
527 Track-Type Skidder Power Train Track Roller Frame
517 Track-Type Skidder Power Train Undercarriage
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Flywheel
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Quick Coupler - Remove and Install
C15 Petroleum Generator Set Engines Electrical System
DASA 280 Measuring and Control System Production of Trees
HH45 Harvester Head, HH55 Harvester Head, HH65 Harvester Head and HH75 Harvester Head Saw Bar - Remove/Install
517 Track-Type Skidder Power Train Final Drive
CP-563D, CS-563D, CS-573D and CS-583D Vibratory Compactors Auxiliary Hydraulic System Auxiliary Hydraulic System
527 Track-Type Skidder Power Train Resonator
3034 Engine for Caterpillar Built Machines Flywheel
793C Off-Highway Truck Machine Systems Double Check Valve (Retarder Control) - Remove and Install
3126E and 3126B Commercial and Truck Engines Belt Tensioner - Inspect - If Equipped
793C Off-Highway Truck Machine Systems Double Check Valve (Service and Secondary Brake) - Remove and Install
793B Off-Highway Truck Steering System Solenoid Valve (Steering)
793C Off-Highway Truck Machine Systems Double Check Valve - Disassemble
793C Off-Highway Truck Machine Systems Double Check Valve - Assemble
793C Off-Highway Truck Machine Systems Double Check Valve (Front Air over Hydraulic Cylinder) - Remove and Install
793C Off-Highway Truck Machine Systems Double Check Valve (Rear Air over Hydraulic Cylinder) - Remove and Install
DASA 280 Measuring and Control System Programming Variables
572R Pipelayer Hook Load Line - Install