3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Caterpillar

Illustration 1	g00691436

(1) Flywheel

(2) Flywheel bolts

Tighten the flywheel bolts to the following torque. ... 73 N·m (54 lb ft)

(3) Ring gear

The maximum temperature for heating the flywheel ring gear for installation ... 150°C (302°F)

Note: When the backplate is installed, place a bead of 8T-9022 Silicone Gasket around the bolt holes for the backplate in the cylinder block.

Flywheel Runout

Face Runout

Illustration 2	g00295955
Measure the Face Runout.

Maximum permissible face runout of the flywheel ... 0.20 mm (0.008 inch)

Refer to Testing and Adjusting, "Flywheel - Inspect".

Outside Diameter Runout

Illustration 3	g00295956
Measure the Outside Diameter Runout.

Maximum permissible outside diameter runout of the flywheel ... 0.20 mm (0.008 inch)

Refer to Testing and Adjusting, "Flywheel - Inspect".