THE HEAD OF THE STICK CYLINDER MAY LOOSEN
Usage:
CONFIDENTIAL TIBU2505-01
THIS TIB REPLACES THE MARCH 17, 1999 BACKHOE LOADER TIB
"THE HEADS OF THE STICK CYLINDERS OR STABILIZER CYLINDER
MAY LOOSEN". DESTROY THE MARCH 17, 1999 TIB.
Show/hide table
|
TECHNICAL INFORMATION BULLETIN |
SEPTEMBER 18, 2002 |
|
BACKHOE LOADERS |
416C (4ZN, 1WR, 5YN, 1XR) 426C (6XN, 1CR, 1YR, 1MR, 7WN, 1ER, 1ZR, 1NR) 428C (8RN, 2CR) 436C (8TN, 1FR, 2AR, 1PR, 9JN, 1GR, 2BR, 1RR) 438C (9KN, 1JR, 2DR, 1TR) 446B (5BL) 416D (BFP, BGJ, BKG) 420D (FDP, BLN, BKC, BMC) 424D (BGP, BKR) 428D (BLL, BMT, BNB, BNS) 430D (BNK, BML) 432D (BLD) 438D (BPE, BPN) 442D (BRY, BRG) |
|
Component Code(s): 5458 |
SUBJECT: THE HEAD OF THE STICK CYLINDER MAY LOOSEN
PROBLEM: The head of the stick cylinder may become loose.
SOLUTION: Tighten the loose cylinder head. Secure the head to the body using a setscrew. See Figure 1.
- Grind an area on the outside diameter of the cylinder barrel and the cylinder head where the two meet. The area should be a flat surface large enough for the 6V-6718 Screw to sit flat. See Illustration 1.
- Drill a 3.6 mm (.14 in) diameter hole 7.5 +/- 1.0 mm (.30 +/- .04 in) deep. Use a 1U-8142 Drill or equivalent.
- Install the 6V-6718 Self Tapping Screw (1) into the hole that was drilled.
Figure 1