1999/06/07 Caterpillar


Correction To Specifications Manual, RENR3003; "Feed Roller Motor For HH75 Harvester Head"{0374,5058}

Usage:


HH45 (2JZ),
HH55 (3MZ),
HH65 (4RZ),
HH75 (5WZ) Harvester Heads

Reference: Service Manual Module, RENR3003, Specifications, HH45, HH55, HH65 and HH75 Harvester Head; Page 5, "Feed Roller Motor for HH75 Harvester Head". This module is found in Service Manual, RENR3000, HH45, HH55, HH65 and HH75 Harvester Heads.

The maximum displacement for the HH75 Harvester Head feed roller motor listed on Page 5 is incorrect. The correct maximum displacement for the HH75 Harvester Head feed roller motor should be 857 cc (52.3 cu in/rev).

Caterpillar Information System:

1999/06/07 Correction To Parts Manuals For 149-2743 Hydraulic Tank Group{5056}
1999/06/07 New Turn Signal Switch Improves Service Life{1611}
1999/06/07 New Injector Is Now Available{1290}
1999/06/07 New Cover Plate Improves Visibility{7262}
1999/06/07 Common Charcoal Gray Paint Used{7581}
1999/06/07 New Automated Cylinder Cutout Test Available With Electronic Technician (ET) Version 2.4 Software Release{0781,1920}
1999/06/07 Improved Lift Cylinder Rod Now Used{5102,7120}
1999/06/01 Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/06/01 Bolt Callout In Propel Planetary Is Incorrect{4050,4011}
1999/06/01 Installation Of Auxiliary Fuse Wiring For Additional Power Source{1417}
1999/06/01 Rotor Drive Chain Part Number Has Changed{3159}
1999/06/01 New Vibratory Pump And Higher Efficiency Motor Improves Compactor Performance{5070,5058,5651,5652}
1999/06/07 Checking The Oil Level In Axles Properly Reduces Erroneous Readings{3268}
1999/06/07 Addition Of Rubber Flashing To Transverse Beam{6648}
1999/06/14 Improved Differential Lube Pump Shaft Prevents Leakage {3258,4009,4129,4134}
1999/06/14 Rear Window Latch Improved {7310}
1999/06/14 Suggested Ways To Increase 3500 Unit Injector Service Life {1290}
1999/06/14 Correction To Service Manual Module SEBU6757; Operation & Maintenance Manual {0374,0375,1105}
1999/06/14 Chassis And Cab Harnesses Must Be Replaced As A Set {3168,3030}
1999/06/14 New Special Instruction For 793 Off-Highway Truck Front And Rear Wheel Adapter Kit Installation Available {4200,4200}
1999/06/14 Service Installation Of 165-7948 Check Valve {4304}
1999/06/14 New Fender Available {7252}
1999/06/14 New Door Gas Spring Has Improved Service Life {7308}
1999/06/14 Dimensions For Articulated Hitches, Lift Arms, Front And Rear Levers, And Oscillating Rear Axle Assemblies Is Now Available In A New Special Instruction {3260,3268,6116,6118,6119,6125,6126,6127,7057,7069,7100}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.