1999/06/07 Caterpillar


New Turn Signal Switch Improves Service Life{1611}

Usage:


769D (5TR),
773D (7ER),
777D (3PR),
777D HAA (2YW),
785B (6HK),
789B (7EK),
793C (4AR) Off-Highway Trucks;
771D (6JR),
775D (6KR) Quarry Trucks;
776D (5ER),
784B (5RK) Tractors

Description of Change: A new turn signal switch is available for off-highway trucks. The new switch offers improved resistance to burnt electrical contacts. Also the retention of the handle to the switch has been improved.

The new 173-3064 Switch is a direct replacement for the former 9G-5589 Switch and available through normal parts ordering channels.

Effective with: The new 173-3064 Switch is effective with 776D (5ER123) Tractors, and 777D (3PR1001), and 777D HAA (2YW106) Off-Highway Trucks.

Adaptable To: The new switch is adaptable to 769D (5TR1-Up), 773D (7ER1-Up), 777D (3PR1-1000), 777D HAA (2YW1-105), 785B (6HK1-Up), 789B (7EK1-Up), and 793C (4AR1-Up) Off-Highway Trucks; and 771D (6JR1-Up), and 775D (6KR1-Up) Quarry Trucks; and 776D (5ER1-122), and 784B (5RK1-Up) Tractors.


173-3064 Switch.

(A) Location of part number and date code.

Caterpillar Information System:

1999/06/07 New Injector Is Now Available{1290}
1999/06/07 New Cover Plate Improves Visibility{7262}
1999/06/07 Common Charcoal Gray Paint Used{7581}
1999/06/07 New Automated Cylinder Cutout Test Available With Electronic Technician (ET) Version 2.4 Software Release{0781,1920}
1999/06/07 Improved Lift Cylinder Rod Now Used{5102,7120}
1999/06/01 Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/06/01 Bolt Callout In Propel Planetary Is Incorrect{4050,4011}
1999/06/01 Installation Of Auxiliary Fuse Wiring For Additional Power Source{1417}
1999/06/01 Rotor Drive Chain Part Number Has Changed{3159}
1999/06/01 New Vibratory Pump And Higher Efficiency Motor Improves Compactor Performance{5070,5058,5651,5652}
1999/06/01 Special Instruction Available For Adjusting The Hydraulic Electronic Controls{0374,5702}
1999/06/01 785 Steering Pump (4T-0382) Installation/Startup Procedure{4306}
1999/06/07 Correction To Parts Manuals For 149-2743 Hydraulic Tank Group{5056}
1999/06/07 Correction To Specifications Manual, RENR3003; "Feed Roller Motor For HH75 Harvester Head"{0374,5058}
1999/06/07 Checking The Oil Level In Axles Properly Reduces Erroneous Readings{3268}
1999/06/07 Addition Of Rubber Flashing To Transverse Beam{6648}
1999/06/14 Improved Differential Lube Pump Shaft Prevents Leakage {3258,4009,4129,4134}
1999/06/14 Rear Window Latch Improved {7310}
1999/06/14 Suggested Ways To Increase 3500 Unit Injector Service Life {1290}
1999/06/14 Correction To Service Manual Module SEBU6757; Operation & Maintenance Manual {0374,0375,1105}
1999/06/14 Chassis And Cab Harnesses Must Be Replaced As A Set {3168,3030}
1999/06/14 New Special Instruction For 793 Off-Highway Truck Front And Rear Wheel Adapter Kit Installation Available {4200,4200}
1999/06/14 Service Installation Of 165-7948 Check Valve {4304}
1999/06/14 New Fender Available {7252}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.