1999/06/14 Caterpillar


Improved Differential Lube Pump Shaft Prevents Leakage {3258,4009,4129,4134}

Usage:


Challenger 65C (2ZJ1-1964),
Challenger 65D (2ZJ1965-Up),
Challenger 65E (6GS),
Challenger 70C (2YL),
Challenger 75C (4KK),
Challenger 75D (5AR),
Challenger 75E (6HS),
Challenger 85C (9TK),
Challenger 85D (4GR),
Challenger 85E (6JS),
Challenger 95E (6KS) Agricultural Tractors

Description of Change: The surface finish of the 136-1854 Drive Gear has been improved to prevent seal leakage caused by microscopic scratches from the rough grinding operation. The 136-1854 Drive Gear is part of the 121-7514 Pump Group (differential lube).

Adaptable To: The improved 136-1854 Drive Gear went into effect in the fourth quarter of 1998 on Challenger E-Series Agricultural Tractors. The improved drive gear is adaptable to all earlier C-Series, D-Series, and E-Series Challenger Agricultural Tractors. Pumps with the improved drive gears have a date code on the end of the shaft of "J8" or later. J = 10th month and 8 = year; i.e. 10/1998. The date code is only visible when the pump is not installed on the machine.

Caterpillar Information System:

1999/06/07 Addition Of Rubber Flashing To Transverse Beam{6648}
1999/06/07 Checking The Oil Level In Axles Properly Reduces Erroneous Readings{3268}
1999/06/07 Correction To Specifications Manual, RENR3003; "Feed Roller Motor For HH75 Harvester Head"{0374,5058}
1999/06/07 Correction To Parts Manuals For 149-2743 Hydraulic Tank Group{5056}
1999/06/07 New Turn Signal Switch Improves Service Life{1611}
1999/06/07 New Injector Is Now Available{1290}
1999/06/07 New Cover Plate Improves Visibility{7262}
1999/06/07 Common Charcoal Gray Paint Used{7581}
1999/06/07 New Automated Cylinder Cutout Test Available With Electronic Technician (ET) Version 2.4 Software Release{0781,1920}
1999/06/07 Improved Lift Cylinder Rod Now Used{5102,7120}
1999/06/01 Use 154-8100 Fuel System Arrangement And 154-8101 Fuel System Group To Measure Engine Fuel Flow{1250,0782}
1999/06/01 Bolt Callout In Propel Planetary Is Incorrect{4050,4011}
1999/06/14 Rear Window Latch Improved {7310}
1999/06/14 Suggested Ways To Increase 3500 Unit Injector Service Life {1290}
1999/06/14 Correction To Service Manual Module SEBU6757; Operation & Maintenance Manual {0374,0375,1105}
1999/06/14 Chassis And Cab Harnesses Must Be Replaced As A Set {3168,3030}
1999/06/14 New Special Instruction For 793 Off-Highway Truck Front And Rear Wheel Adapter Kit Installation Available {4200,4200}
1999/06/14 Service Installation Of 165-7948 Check Valve {4304}
1999/06/14 New Fender Available {7252}
1999/06/14 New Door Gas Spring Has Improved Service Life {7308}
1999/06/14 Dimensions For Articulated Hitches, Lift Arms, Front And Rear Levers, And Oscillating Rear Axle Assemblies Is Now Available In A New Special Instruction {3260,3268,6116,6118,6119,6125,6126,6127,7057,7069,7100}
1999/06/14 Recommended Lubricant For Cab Door Locks And Hood Locks {7251,7273,7308}
1999/06/14 New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/21 New Components Provide Improved Sealing In Engine Exhaust Manifold Groups {1059}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.