Repair Centers For Topcon Sonic Grade/Slope Sensors Established {5645}
Usage:
AP-800C (1PM),
AP-1000 (1HD),
AP-1050 (1JG),
AP-1050B (6ZN),
AP-1055B (8BM) Asphalt Pavers
Topcon Laser Systems Inc. (formerly Agtek Development Co., Inc.), supplier for the 108-2408 Sonic Tracker, 108-2402 Slope Sensor, and 108-2398 Control Box, all used with pavers equipped with sonic grade and slope control, has established the following regional service centers:
5508 Old Wake Forest Rd.
Raleigh, NC 27609
(919) 872-2386
Laser Control Inc.
9201 E. Bloomington Freeway, Suite R
Bloomington, MN 55420
(612) 443-2220
Topcon Laser Systems of Texas
2845 W. Airport Freeway, Suite 100
Irving, TX 75062
(214) 594-8535
Southwest Lasers
101 Coal Ave.
Raton, NM 87740
(505) 445-2411
These service centers are equipped to handle troubleshooting, calibration, and repair of any Topcon machine control component. The service centers also have loaner units available.
Caterpillar Information System:
1997/03/31 Drum Drive Plate Wear {6605}
1997/03/31 Procedure For Aligning Front Suspension Frame Group With The Output Transfer Gearbox {7200}
1997/03/31 Special Instructions REHS0019 And REHS0020 Available For Installation Of Differential Thrust Stops {3258}
1997/03/31 New Thrust Washer Eliminates Use Of Retaining Screws In Final Drive; Eliminates Possibility Of Damage From Loose Retaining Screws {4051}
1997/03/31 Bolt Lengths Changed In Oil Cooler Lines Group For Proper Fastening {1365,7554}
1997/03/31 "Higher Viscosity Power Train Oil" Sticker Has Been Added To The Operation & Maintenance Manual {0645,4070}
1997/03/31 Differences Between The B-Series Backhoe Loader And The C-Series Backhoe Loader Torque Converter Temperature Gauge {7477,7450}
1997/03/31 Filler Cap Assembly For Backhoe Loaders {1107,1316}
1997/03/31 New Control Valve Groups For Attachments Have Stronger Valve Bodies {5054,5051}
1997/03/31 Production Improvements To Cab Rear Window {7301,7310}
1997/03/24 New VIMS Service Manual Is Available {7601}
1997/03/24 High Strength Screws Retain Pump And Motor Retraction Plate For Rotating Pump Groups {5431,5058,5070}
1997/03/31 Improved V-Belt For Operation Of Compressor System {1802}
1997/03/31 New Transmission Harnesses With Revised Grounding Now Used To Increase Service Life {3168,3030}
1997/03/31 New Shaft Assembly Used In The Steering Gear Groups To Improve Service Life {4301,4300}
1997/03/31 Common Services Software Install Procedures {7601}
1997/03/31 Information System Builder (ISB), WIN32s, And Display Driver Compatibility {7601}
1997/03/31 Tools For 346D Jake Brake {1119,1119}
1997/04/07 Improved Drivewheel Designs Available {4199}
1997/04/07 Improved Valve Stem For Articulation And Ripper Control Valve Groups Increase Performance At Initial Start-Up {5351}
1997/04/07 Improved Adjustment Procedure For Extendable Sticks {6509,6533}
1997/04/07 New Integral Seal And Oil Pan Sections Reduce Possibility Of Oil Leaks At Oil Pan "Tee" Joint {1302}
1997/04/07 New Braided Steel Ether Lines Available For Increased Durability {1456}
1997/04/07 Proper Orifice Location Provides Correct Retarder Control {3123,3100,3109,3126,3140}