New VIMS Service Manual Is Available {7601}
Usage:
5130 (5ZL, 7TJ),
5230 (7LL) Excavators;
784B (5RK) Tractor;
785B (6HK),
789B (7EK),
793B (1HL) 793C (4AR) Trucks;
992G (7HR),
994 (9YF) Wheel Loaders
The latest VIMS Service Manual, SENR6059-03, "VITAL INFORMATION MANAGEMENT SYSTEM" is available. The new revision includes:
-
- * Listing of all VIMS message center abbreviations and their full name.
- * Listing of all VIMS parameters, their parameter identification number and full parameter definition.
- * Updated MID/CID/FMI listing.
- * The VIMS Abbreviated Troubleshooting Procedures section information in the Service Manual is the same as that displayed when using VIMS-PC 2.0 and later with 9.3x on-board software.
- * Correction to suspension cylinder troubleshooting procedure.
- * All service information relating to Large Wheel Loaders.
- * Explanation of on-board software differences (6.x, 7.x, 9.3x, etc.
- * Explanation of hardware differences (V2.0 and V3.0).
- * Enhanced procedure for use of the service tool (PC) and VIMS-PC software.
- * Listing of all VIMS message center abbreviations and their full name.
Correction to Detected Faults Chart
The Detected Faults - VIMS Only chart, CID 379 - Machine Auto Lube Pressure Sensor - located on page 90, has the wrong information listed. The correct information is shown in Chart A. VIMS-PC software displays the correct information for the troubleshooting procedure related to a CID 379 system event.
Caterpillar Information System:
1997/03/24 High Strength Screws Retain Pump And Motor Retraction Plate For Rotating Pump Groups {5431,5058,5070}
1997/03/24 Exhaust Leaks Affect The 100-3055 Sensor {7601}
1997/03/24 New Brake Relay Valve With New Seal And Backup Ring Now Used To Improve Valve Operation {4280,4250}
1997/03/24 New 127-0353 Differential Bearing Cage With Thicker Flange Is Now Available {3258}
1997/03/24 Consist For Quick Coupler Group {6129}
1997/03/24 Improvements Strengthen Left And Rear Cab Handholds {7256,7301}
1997/03/24 Back-Up Rings Prevent O-Ring Seals From Pushing Out Of Control Valve Group For Dozer Lift {5051,5054,5079,5115,5123}
1997/03/17 Fan Belt Tightener Shaft Replacement Procedure Provides Grease Path to Bearings{1358}
1997/03/17 Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/17 VIMS Fuel Parameters Explained{7601}
1997/03/17 Setting User Access Rights For VIMS{7601}
1997/03/17 Special Instruction SEHS9824-01 Available For Cab Window Service Procedure; Provides New Adhesive Information For Improved Bonding Capabilities Under Cold Weather Conditions{7310}
1997/03/31 Production Improvements To Cab Rear Window {7301,7310}
1997/03/31 New Control Valve Groups For Attachments Have Stronger Valve Bodies {5054,5051}
1997/03/31 Filler Cap Assembly For Backhoe Loaders {1107,1316}
1997/03/31 Differences Between The B-Series Backhoe Loader And The C-Series Backhoe Loader Torque Converter Temperature Gauge {7477,7450}
1997/03/31 "Higher Viscosity Power Train Oil" Sticker Has Been Added To The Operation & Maintenance Manual {0645,4070}
1997/03/31 Bolt Lengths Changed In Oil Cooler Lines Group For Proper Fastening {1365,7554}
1997/03/31 New Thrust Washer Eliminates Use Of Retaining Screws In Final Drive; Eliminates Possibility Of Damage From Loose Retaining Screws {4051}
1997/03/31 Special Instructions REHS0019 And REHS0020 Available For Installation Of Differential Thrust Stops {3258}
1997/03/31 Procedure For Aligning Front Suspension Frame Group With The Output Transfer Gearbox {7200}
1997/03/31 Drum Drive Plate Wear {6605}
1997/03/31 Repair Centers For Topcon Sonic Grade/Slope Sensors Established {5645}
1997/03/31 Improved V-Belt For Operation Of Compressor System {1802}