Tools For 346D Jake Brake {1119,1119}
Usage:
3406, 3406B Engines
Warranty: M
Features/Benefits
134-2836 Feeler Gauge:
-
- * Used to adjust slave piston lash on model 346D Jake Brake engine retarder
134-2837 Slave Piston Compressor:
-
- * Used to remove slave pistons from housing on all models of Jake Brake engine retarders
- * Piston compressor has fluted knob for easier turning
- * Used to remove slave pistons from housing on all models of Jake Brake engine retarders
Specifications/Technical Information
Thickness of feeler gauge - 1.70 mm (.067 inch)
(1) 134-2836 Feeler Gauge. (2) 134-2837 Slave Piston Compressor.
Caterpillar Information System:
1997/03/31 Information System Builder (ISB), WIN32s, And Display Driver Compatibility {7601}
1997/03/31 Common Services Software Install Procedures {7601}
1997/03/31 New Shaft Assembly Used In The Steering Gear Groups To Improve Service Life {4301,4300}
1997/03/31 New Transmission Harnesses With Revised Grounding Now Used To Increase Service Life {3168,3030}
1997/03/31 Improved V-Belt For Operation Of Compressor System {1802}
1997/03/31 Repair Centers For Topcon Sonic Grade/Slope Sensors Established {5645}
1997/03/31 Drum Drive Plate Wear {6605}
1997/03/31 Procedure For Aligning Front Suspension Frame Group With The Output Transfer Gearbox {7200}
1997/03/31 Special Instructions REHS0019 And REHS0020 Available For Installation Of Differential Thrust Stops {3258}
1997/03/31 New Thrust Washer Eliminates Use Of Retaining Screws In Final Drive; Eliminates Possibility Of Damage From Loose Retaining Screws {4051}
1997/03/31 Bolt Lengths Changed In Oil Cooler Lines Group For Proper Fastening {1365,7554}
1997/03/31 "Higher Viscosity Power Train Oil" Sticker Has Been Added To The Operation & Maintenance Manual {0645,4070}
1997/04/07 Improved Drivewheel Designs Available {4199}
1997/04/07 Improved Valve Stem For Articulation And Ripper Control Valve Groups Increase Performance At Initial Start-Up {5351}
1997/04/07 Improved Adjustment Procedure For Extendable Sticks {6509,6533}
1997/04/07 New Integral Seal And Oil Pan Sections Reduce Possibility Of Oil Leaks At Oil Pan "Tee" Joint {1302}
1997/04/07 New Braided Steel Ether Lines Available For Increased Durability {1456}
1997/04/07 Proper Orifice Location Provides Correct Retarder Control {3123,3100,3109,3126,3140}
1997/04/07 Change To Suspension Accumulator Improves Ride And Operator Comfort {5077,7200}
1997/04/07 Spacers Used In Hoist Cylinder Mounting Groups To Reduce Side-To-Side Movement Of The Cylinder On The Mounting Pins {5102}
1997/04/07 New Service Parts For The Front And Rear Drive Shaft Groups For Improved Reliability {4074}
1997/04/07 Service Parts Are Available For The 117-5238 And 118-2247 Hydraulic System Control Valve Groups {5117,5454}
1997/04/07 Correction To The Control Replacement Procedure In Service Manual Module, SENR5890, Electronic Transmission Control System {3168}
1997/04/07 New Heating Ventilation And Air Conditioning (HVAC) Electronic Control Troubleshooting Procedure Available {7309}