Special Instruction REHS0006 Available For Installation Of Output Yoke And Screen Housing On Remanufactured Transmissions {3159,3002}
Usage:
824C (85X1-Up),
834B (92Z277-Up) Wheel Tractors;
825C (86X1-Up),
826C (87X1-Up) Compactors;
980C (63X6288-Up),
988B (50W7508-Up),
992C (49Z701-Up) Wheel Loaders
Special Instruction REHS0006 "Installation Of Output Yoke And Screen Housing On Remanufactured Transmissions" is now available through the normal distribution system.
This Special Instruction describes the procedure to install the correct output yoke on remanufactured transmissions. The transmission in the machines listed uses a fixed output yoke, whereas the transmission in earlier models uses the floating output yoke.
This Special Instruction also provides the options that are available to adapt to the new screen housing that is on the remanufactured transmissions.
Caterpillar Information System:
1997/01/27 Remote Lubrication Lines Used To Lubricate Upper Hoist Cylinder Pins {7510,7258,5102}
1997/01/27 Parts Service Block Replaces Nuts To Provide Better Bolt Retention For The Spillplate Assembly In The Body Group {7258}
1997/01/27 New Parts Service Pad And Shim Replaces The Buffer In The Dump Body Group {7258}
1997/01/27 New Hoist Control Lever And Handle Improves Operator Comfort {5063}
1997/01/27 New Hose Assembly Improves Hose Routing And Prevents Damage Due To Contact With Steel Tubes {3154}
1997/01/27 Installation Of The Parts Service 7N-3542 Core In The Basic Radiator Assembly {1353}
1997/01/27 New Pressure Switch Assembly Available To Allow The Jake Brake To Release At Low Engine Speed {1119}
1997/01/27 New Shield In The Exhaust Shield Group Gives Improved Service {1067}
1997/01/27 New Temperature Sensor For Differential Improves VIMS Data Accuracy {3290,7601}
1997/01/27 Special Instruction, REHS0033, "Assembly Procedure For 777D Truck Body" Is Available {0374,7258,7960}
1997/01/27 An Improved Adjustment Procedure For The Steering Console Cylinder Eliminates Steering Console Drift {4300,5258}
1997/01/27 Improved Procedure For Preloading Final Drive Bearings Now Available {4050,4059}
1997/01/27 Solution To Cab Window Fogging {1818,7309,7310,7320}
1997/01/27 New Brake Bleeding Procedure {4250,4293}
1997/01/27 Verify Offset Dimension When Ordering New Wheel Assembly {4209,4202}
1997/01/27 Hydraulic Hose Retention For Vibratory And Drum Propel Systems Improved {5057}
1997/01/27 New Control Lever Group Requires Spacer {1265,3209,5258}
1997/01/27 Repair Centers For Sonic Grade Sensors Established {5645}
1997/01/27 C-V (U) Joint Life Extended Through Correct Operation Of The Differential Lock {3274,2453,3259,3260,3264}
1997/01/27 New Replacement Procedure For Hydraulic Hoses Inside The Telescopic Material Handler Boom {5057,6460}
1997/01/27 VIMS Exhaust Temperature Sensor Is Improved {7601,1919}
1997/01/27 Use Of Windows Write (Or Notepad) And Paintbrush For Taking Field Notes {0785,7601}
1997/01/27 Field Repair Of Single Wire Breaks In Harnesses {1408}
1997/01/27 Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}