Installation Of The Parts Service 7N-3542 Core In The Basic Radiator Assembly {1353}
Usage:
D250B (5WD),
D300B (4SD),
D300D (5MG),
D250E (5TN),
D300E (7FN) Articulated Trucks
There have been questions concerning the installation of the parts service 7N-3542 Core in the basic radiator groups in the articulated trucks listed above. The following information should be noted when installing a parts service core in the above machines.
-
- 1. The 7N-3542 Core has the corners of the end plates that are cut away at one end. It is not necessary to use the studs in the radiator header tank at that corner. The studs may either be left in place and not used or removed from the radiator header tank.
- 2. At the other end of the core, there are only three holes and five holes in the radiator header tank. Remove the unnecessary studs from the header tank (two studs in each header tank).
- 3. The joint between the core and header tanks will be free of leaks when the 6U-8687 Gasket is used.
- 1. The 7N-3542 Core has the corners of the end plates that are cut away at one end. It is not necessary to use the studs in the radiator header tank at that corner. The studs may either be left in place and not used or removed from the radiator header tank.
Caterpillar Information System:
1997/01/27 New Pressure Switch Assembly Available To Allow The Jake Brake To Release At Low Engine Speed {1119}
1997/01/27 New Shield In The Exhaust Shield Group Gives Improved Service {1067}
1997/01/27 New Temperature Sensor For Differential Improves VIMS Data Accuracy {3290,7601}
1997/01/27 Special Instruction, REHS0033, "Assembly Procedure For 777D Truck Body" Is Available {0374,7258,7960}
1997/01/27 An Improved Adjustment Procedure For The Steering Console Cylinder Eliminates Steering Console Drift {4300,5258}
1997/01/27 Improved Procedure For Preloading Final Drive Bearings Now Available {4050,4059}
1997/01/27 Charcoal Air Filter Available Reduces Odors From Outside Air {7309,7320,7342}
1997/01/20 Improved Multi-Row Modules (IMRM) Used In Caterpillar Radiators Have Different Designs {1353}
1997/01/20 New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/20 Methods Of Obtaining Engine Flash Files {1902}
1997/01/20 VIMS-PC Service Tool Operating System Environment Answers {7601}
1997/01/20 A Port Now Provided In The Engine Oil Filter Group For Scheduled Oil Sampling (S.0.S.) {7542,1306,1051}
1997/01/27 New Hose Assembly Improves Hose Routing And Prevents Damage Due To Contact With Steel Tubes {3154}
1997/01/27 New Hoist Control Lever And Handle Improves Operator Comfort {5063}
1997/01/27 New Parts Service Pad And Shim Replaces The Buffer In The Dump Body Group {7258}
1997/01/27 Parts Service Block Replaces Nuts To Provide Better Bolt Retention For The Spillplate Assembly In The Body Group {7258}
1997/01/27 Remote Lubrication Lines Used To Lubricate Upper Hoist Cylinder Pins {7510,7258,5102}
1997/01/27 Special Instruction REHS0006 Available For Installation Of Output Yoke And Screen Housing On Remanufactured Transmissions {3159,3002}
1997/01/27 Solution To Cab Window Fogging {1818,7309,7310,7320}
1997/01/27 New Brake Bleeding Procedure {4250,4293}
1997/01/27 Verify Offset Dimension When Ordering New Wheel Assembly {4209,4202}
1997/01/27 Hydraulic Hose Retention For Vibratory And Drum Propel Systems Improved {5057}
1997/01/27 New Control Lever Group Requires Spacer {1265,3209,5258}
1997/01/27 Repair Centers For Sonic Grade Sensors Established {5645}