Repair Centers For Sonic Grade Sensors Established {5645}
Usage:
PM-565 (3TK) Cold Planer
Description of Change:
Topcon Laser Systems Inc., supplier of the 1G-8990 and OR-4923 Sonic Sensor Groups, has established the following service centers:
5508 Old Wake Forest Rd.
Raleigh, NC 27609
(919) 872-2386
Laser Control Inc.
9201 E. Bloomington Freeway, Suite R
Bloomington, MN 55420
(612)443-2220
Topcon Laser Systems of Texas
2845 W. Airport Freeway, Suite 100
Irving, TX 75062
(214) 594-8535
Southwest Lasers
101 Coal Avenue
Raton, NM 87740
(505) 445-2411
These service centers are equipped to handle troubleshooting, calibration and repair of any Topcon machine control component. The service centers also have ioaner units available.
Caterpillar Information System:
1997/01/27 New Control Lever Group Requires Spacer {1265,3209,5258}
1997/01/27 Hydraulic Hose Retention For Vibratory And Drum Propel Systems Improved {5057}
1997/01/27 Verify Offset Dimension When Ordering New Wheel Assembly {4209,4202}
1997/01/27 New Brake Bleeding Procedure {4250,4293}
1997/01/27 Solution To Cab Window Fogging {1818,7309,7310,7320}
1997/01/27 Special Instruction REHS0006 Available For Installation Of Output Yoke And Screen Housing On Remanufactured Transmissions {3159,3002}
1997/01/27 Remote Lubrication Lines Used To Lubricate Upper Hoist Cylinder Pins {7510,7258,5102}
1997/01/27 Parts Service Block Replaces Nuts To Provide Better Bolt Retention For The Spillplate Assembly In The Body Group {7258}
1997/01/27 New Parts Service Pad And Shim Replaces The Buffer In The Dump Body Group {7258}
1997/01/27 New Hoist Control Lever And Handle Improves Operator Comfort {5063}
1997/01/27 New Hose Assembly Improves Hose Routing And Prevents Damage Due To Contact With Steel Tubes {3154}
1997/01/27 Installation Of The Parts Service 7N-3542 Core In The Basic Radiator Assembly {1353}
1997/01/27 C-V (U) Joint Life Extended Through Correct Operation Of The Differential Lock {3274,2453,3259,3260,3264}
1997/01/27 New Replacement Procedure For Hydraulic Hoses Inside The Telescopic Material Handler Boom {5057,6460}
1997/01/27 VIMS Exhaust Temperature Sensor Is Improved {7601,1919}
1997/01/27 Use Of Windows Write (Or Notepad) And Paintbrush For Taking Field Notes {0785,7601}
1997/01/27 Field Repair Of Single Wire Breaks In Harnesses {1408}
1997/01/27 Premachined Valve Seat Inserts And Precision Valve Guide Increase Valve Life {1103,1104}
1997/01/27 Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly {1205}
1997/01/27 Checking The Alignment Of Timing Gear Marks {1206}
1997/01/27 Engine Oil Recommendation For 3408E (99C) And 3412E (80M) Engines {1318}
1997/01/27 125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}
1997/01/27 128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27 Cylinder Head Stress Plate Used During Cylinder Bore Honing And Measurement {1223}