1996/12/02 Caterpillar


Special Instruction REHS0029 Available To Modify Radiator Support And Guard Group To Provide Cleanout Access For Radiator {1353,7272}

Usage:


120H (4MK, 5FM, 6NM, 6TM, 2AN, 6YN, 9YR) 135H (3YK, 7MM, 7ZN, 8WN) 12H (4XM, 5ZM, 8MN, 2LR, 2WR, 4ER, 2GS) 140H (2ZK, 5HM, 8JM, 8KM, 9TN, 9ZN, 3AS) 160H (9EJ, 2FM, 3GM, 6WM, 9JM, 2HS) 143H (1AL) 163H (5AK) 14H (7WJ) Motor Graders

Special Instruction REHS0029 "Modify Radiator Support and Guard Group to Provide Cleanout Access for Radiator" is now available through the normal distribution system.

This Special Instruction provides the necessary information needed to provide service doors to the radiator support and guard group. This will allow easier access to the radiator core in order to clean any entrapped debris.

Caterpillar Information System:

1996/12/02 Check Turbocharger Seals If There Is A Sudden Increase In Crankcase Blowby {1052,1317}
1996/11/25 Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25 Inspection of Tire Stems When Using Calcium Chloride Ballast Prevents Tire Failures {4203,4231,4207}
1996/11/25 Dowel, Pin or Piston Limits Poppet Valve Movement In Relief Valve Groups {5072}
1996/11/25 Blade Lift Cylinder Improved {5102}
1996/11/25 Install Additional 8Y-6388 Louver Assemblies to Improve Defogging of Cab Windshield {7304,7309,7310,7451}
1996/11/25 Rotate 8Y-6388 Louver Assemblies in Heater Group to Improve Service Life {7304,7309}
1996/11/25 Special Instruction, SEHS9926, "Installation of Turbocharger Debris Shields" Available {7263,7154,7158}
1996/11/18 New Service Parts For The Front And Rear Drive Shaft Groups For Improved Reliability{4074}
1996/11/18 Measure Vibration Of Vibratory Compactor Drums With Hand Held Meters{7471,0783}
1996/11/18 Radiator And Oil Cooler Mounting Improved{1351}
1996/11/18 New Stud Available For Gear Pump Group{5073}
1996/12/02 New Retainer Screws Prevent Contact With Seat Back On Cab Recirculation Filter {7342}
1996/12/02 Ground Strap Relocated To Prevent Damage From Debris {7423}
1996/12/02 Overfill Of Hydraulic Tank May Cause Oil Leakage {7479,1460}
1996/12/02 New Front Park, Turn Lamp Is Available That Is Not Affected By Vibration {1430}
1996/12/02 Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02 New Drive Train Lubrication Updates {3251,3252,3253,7568,7581}
1996/12/02 New Assembly Procedure For Rotate Carriage Groups {6408,6405,6460}
1996/12/02 Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02 Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02 New Housings Are Available In Regulator Housing Groups {1393}
1996/12/09 Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
1996/12/09 Remove And Install Threaded Glands On Hydraulic Cylinder Using 9U-7868 Spanner Wrench Group, 9U-7869 Spanner Wrench Group, Eleven Adapter Plates (See Chart B){5456,0738}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.