Usage:
CS-531C (5ZN, 9RN),
CP-533C (3XN, 3YN),
CS-533C (2WN, 2XN),
CP-563C (5JN, 5KN),
CS-563C (4KN, 4LN),
CS-573C (6LN),
CS-583C (7MN, 7NN) Vibratory Compactors
Description of Change: A second rubber mount has been added to the radiator and oil cooler assembly to increase the service life of the mounting system.
Adaptable To: The new radiator and oil cooler mounts are effective with CS-531C (5ZN137, 9RN148), CS-533C (2WN47, 2XN79), CP-533C (3XN40, 3YN42), CS-563C (4KN194, 4LN116), CP-563C (5JN154, 5KN77), CS-573C (6LN63), and CS-583C (7MN97, 7NN95) Vibratory Compactors. The new mounting system is adaptable to all earlier machines. Use the parts list and procedure that follows:
Procedure To Install Second Rubber Mount
1. Remove the hood and air cleaner assembly.
Illustration 1. Side View Of Radiator. (X) 116-5044 Oil Cooler. (Y) 118-1923 Angle.
2. Support the radiator and oil cooler assembly, and remove the existing 118-1923 Angle (Y).
Illustration 2. 118-1923 Angle (Y). (A) 25 mm (1 in). (B) 100 mm (3.94 in). (C) 25 mm (1 in). (D) 19.05 mm ( .75 in) dia. holes.
3. Locate and drill new holes in 118-1923 Angle (Y) as shown in Illustration 2.
Illustration 3. Top View of 116-5044 Oil Cooler (X). (E) 280.2 mm (11 in). (F) 100 mm (3.9 in). (G) 22.2 mm (.87 in). (H) 9.9 mm (.39 in) dia. holes.
4. Locate and drill new holes in the bracket attached to 116-5044 Oil Cooler (X).
Illustration 4. Location of new mounts and related hardware. (1) 9D-7924 Mount. (2) 8T-9377 Bolt. (3) 8T-4226 Washer. (4) 8T-4896 Washer. (5) 3K-6060 Locknut. (6) 8T-4172 Bolt. (7) 8T-4121 Washer. (8) 8T-4133 Nut. (9) 4N-0205 Spacer.
5. Install 118-1923 Angle as shown in Illustration 4.