New Stud Available For Gear Pump Group{5073}
Usage:
Caterpillar Information System:
1996/11/18 New Brake Adjustment Procedure For Improved Inching Ability {3162,4115,4250}
1996/11/18 Special Instruction REHS0018 Available For Installation And Adjustment Of Truck Body {7258}
1996/11/18 An Improved Suspension Control Valve Increases Ease Of Operation{7214}
1996/11/18 Stronger Screen In Hydraulic Tank Improves Service Life{5056}
1996/11/18 Serviceable Parts Available For Cab Rear Access Panel{7300,7301,7329,6331}
1996/11/18 New Compressor Cover Reduces Turbocharger Noise{1060,1052,1801}
1996/11/11 Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/11 Proper Retrofitting Of Air Conditioning Refrigerants{7320}
1996/11/11 New Air Conditioner Evaporator Coil Improves Service Life{7343}
1996/11/11 New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11 Service Replacements For Discontinued Piston Pump Groups{5070}
1996/11/11 Follow Correct Maintenance Procedure To Extend Drum Drive Gear Reducer Service Life{5655}
1996/11/18 Radiator And Oil Cooler Mounting Improved{1351}
1996/11/18 Measure Vibration Of Vibratory Compactor Drums With Hand Held Meters{7471,0783}
1996/11/18 New Service Parts For The Front And Rear Drive Shaft Groups For Improved Reliability{4074}
1996/11/25 Special Instruction, SEHS9926, "Installation of Turbocharger Debris Shields" Available {7263,7154,7158}
1996/11/25 Rotate 8Y-6388 Louver Assemblies in Heater Group to Improve Service Life {7304,7309}
1996/11/25 Install Additional 8Y-6388 Louver Assemblies to Improve Defogging of Cab Windshield {7304,7309,7310,7451}
1996/11/25 Blade Lift Cylinder Improved {5102}
1996/11/25 Dowel, Pin or Piston Limits Poppet Valve Movement In Relief Valve Groups {5072}
1996/11/25 Inspection of Tire Stems When Using Calcium Chloride Ballast Prevents Tire Failures {4203,4231,4207}
1996/11/25 Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/12/02 Check Turbocharger Seals If There Is A Sudden Increase In Crankcase Blowby {1052,1317}
1996/12/02 Special Instruction REHS0029 Available To Modify Radiator Support And Guard Group To Provide Cleanout Access For Radiator {1353,7272}