Rotate Crankshaft On 3114, 3116 And 3126 Engines Using 9U-6943 Gear Shaft Housing Assembly Or 9U-7336 Gear Shaft Housing Assembly {1202,0701}
Usage:
3114, 3116, 3126 Engines
Warranty: G
Features/Benefits
-
- * Used to rotate crankshaft (makes setting valves and engine timing procedures easier)
- * Used with 5P-7305 Gear, Engine Turning and 1/2inch square drive ratchet
- * Fastens to starter mounting hole using starter mounting bolts
- * Rotate gear shaft housing assembly until 5P-7305 Engine Turning Gear engages flywheel gear before tightening starter mounting bolts
- * Used to rotate crankshaft (makes setting valves and engine timing procedures easier)
Specifications/Technical Information
Use 9U-7336 if (X) equals 127.0 mm (5.00 inch).
Use 9U-6943 if (X) equals 146.0 mm (5.75 inch).
(1) 9U-7336 Gear Shaft Housing Assembly. (2) 9U-6943 Gear Shaft Housing Assembly.
Caterpillar Information System:
1996/12/02 New Housings Are Available In Regulator Housing Groups {1393}
1996/12/02 Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02 Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02 New Assembly Procedure For Rotate Carriage Groups {6408,6405,6460}
1996/12/02 New Drive Train Lubrication Updates {3251,3252,3253,7568,7581}
1996/12/02 Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02 New Front Park, Turn Lamp Is Available That Is Not Affected By Vibration {1430}
1996/12/02 Overfill Of Hydraulic Tank May Cause Oil Leakage {7479,1460}
1996/12/02 Ground Strap Relocated To Prevent Damage From Debris {7423}
1996/12/02 New Retainer Screws Prevent Contact With Seat Back On Cab Recirculation Filter {7342}
1996/12/02 Special Instruction REHS0029 Available To Modify Radiator Support And Guard Group To Provide Cleanout Access For Radiator {1353,7272}
1996/12/02 Check Turbocharger Seals If There Is A Sudden Increase In Crankcase Blowby {1052,1317}
1996/12/09 Remove And Install Threaded Glands On Hydraulic Cylinder Using 9U-7868 Spanner Wrench Group, 9U-7869 Spanner Wrench Group, Eleven Adapter Plates (See Chart B){5456,0738}
1996/12/09 Tooling Plates Simplify Swashplate Neutral Adjustment On Sauer Sunstrand Hydraulic Pumps; 4C-8498 Plate (42 CC Pumps - Drum Propel), 4C-9419 Plate (55 CC Pumps - Axle Propel), 127-5653 Plate, Neutral (75 CC Pumps), 127-5654 Plate, Neutral (100 CC Pum
1996/12/09 Thicker 1U-9646 Pusher And 1U-9647 Pusher Make XT-3 Hose Assembly Easier{0684}
1996/12/09 Use 4C-9416 Wrench Assembly To Remove Asphalt Screed Mounting Nuts{6640,0602}
1996/12/09 Electronic Control Training Aid{0713}
1996/12/09 124-0662 Impact Socket For Removing And Installing Cylinder Head Bolts{1100,0602}
1996/12/09 Use 6V-7920 Spanner Wrench To Remove And Install 5P-5813 Pinion Nut{3254,4056,0602}
1996/12/09 124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}
1996/12/09 Tools Used To Remove And Install Both Sizes Of Camshaft Bearings In 3500B Engines{1211,0701}
1996/12/16 New Procedure To Calibrate Tensioner Warning Switch {4197}
1996/12/16 Fire Extinguisher Bracket Now Used {7254,7419}
1996/12/16 Spring Force Increased On Freewheel Valve Spool In Control Valve Group For Front Wheel Drive System {4352}