1996/11/11 Caterpillar


Foot Rest Has Been Added To Improve Operator Comfort{7301,7265}

Usage:


D25D (1HK),
D30D (3AJ),
D350E (9LR),
D400E (2YR) Articulated Trucks

Description of Change: A foot rest has been added to improve operator comfort.

Adaptable To: The new 137-5309 Foot Rest is effective with D25D (1HK666), D30D (3AJ413), D350E (9LR230), D400E (2YR330) Articulated Trucks. The foot rest is adaptable to earlier models by adding holes to the 7U-6352 Floor Plate as shown in illustration 1. Access to the back of the floor plate, for installation purposes, can be gained by removing the heater air intake cover at the lower front portion of the outside of the cab. Refer to the chart and illustration 2 for the parts needed.


Illustration 1. 7U-6352 Floor Plate as viewed from inside the cab. (A) 20.7 mm (.81 in). (B) 76.0 mm (2.99 in). (C) 90.0 mm (3.54 in). (D) 18.5 mm (.73 in) Diameter. (E) Bend Line Down (F) Bend Line Up.


Illustration 2. Foot Rest installed in cab.

Caterpillar Information System:

1996/11/11 New Cover Plates For Rear Of Headlight Guards Protect Wiring From Damage{7182}
1996/11/11 New Crankcase Guard Provides Increased Resistance To Damage{7151}
1996/11/11 Hydraulic Oil Additive Used That Eliminates Noise In Differentials {3263}
1996/11/11 New Material Increases Service Life Of Brake Hubs{4215,4208,4201}
1996/11/11 Special Instructions SEHS9896, REHS0037 And REHS0038 Available For Installation Of A Bolt-On Ball On Early Drawbars{6153,6157,6170,6171}
1996/11/11 Longer Battery Cable Now Used To Prevent Interference With Starting Motor Cover{1401}
1996/11/11 Improved Electronic Control Modules Reduce Electrical Interference{7490,3175}
1996/11/11 Special Instruction, SEHS9874-01, "Challenger Agricultural Tractors In Scraper Applications"{0375,0376,4150,7000}
1996/11/04 Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/04 Adjustment Procedure For Cab Door Latch And Hold-Open Release {7301,7308}
1996/11/04 New Suspension Frame Group Now Used To Prevent Cracking {7216,7203}
1996/11/04 Improper Monitoring Of DIFFERENTIAL OIL LEVEL By Vital Information Management System (VIMS) {3258,1920,7601}
1996/11/11 Incorrect Electronic Control Service Codes Film{1901}
1996/11/11 Follow Correct Maintenance Procedure To Extend Drum Drive Gear Reducer Service Life{5655}
1996/11/11 Service Replacements For Discontinued Piston Pump Groups{5070}
1996/11/11 New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11 New Air Conditioner Evaporator Coil Improves Service Life{7343}
1996/11/11 Proper Retrofitting Of Air Conditioning Refrigerants{7320}
1996/11/11 Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/18 New Compressor Cover Reduces Turbocharger Noise{1060,1052,1801}
1996/11/18 Serviceable Parts Available For Cab Rear Access Panel{7300,7301,7329,6331}
1996/11/18 Stronger Screen In Hydraulic Tank Improves Service Life{5056}
1996/11/18 An Improved Suspension Control Valve Increases Ease Of Operation{7214}
1996/11/18 Special Instruction REHS0018 Available For Installation And Adjustment Of Truck Body {7258}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.