Incorrect Electronic Control Service Codes Film{1901}
Usage:
AP-1050B (6ZN),
AP-1055B (8BM) Asphalt Pavers
The 117-8526 Film, located on the inside surface of the drop down panel at the left side of the paver, lists incorrect information. The correct "Possible FMI's" (Failure Mode Identifiers) for the "044 CID" (Component Identifier) - Parking brake solenoid for the propel control module are 3, 5, and 6.
Caterpillar Information System:
1996/11/11 Foot Rest Has Been Added To Improve Operator Comfort{7301,7265}
1996/11/11 New Cover Plates For Rear Of Headlight Guards Protect Wiring From Damage{7182}
1996/11/11 New Crankcase Guard Provides Increased Resistance To Damage{7151}
1996/11/11 Hydraulic Oil Additive Used That Eliminates Noise In Differentials {3263}
1996/11/11 New Material Increases Service Life Of Brake Hubs{4215,4208,4201}
1996/11/11 Special Instructions SEHS9896, REHS0037 And REHS0038 Available For Installation Of A Bolt-On Ball On Early Drawbars{6153,6157,6170,6171}
1996/11/11 Longer Battery Cable Now Used To Prevent Interference With Starting Motor Cover{1401}
1996/11/11 Improved Electronic Control Modules Reduce Electrical Interference{7490,3175}
1996/11/11 Special Instruction, SEHS9874-01, "Challenger Agricultural Tractors In Scraper Applications"{0375,0376,4150,7000}
1996/11/04 Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/04 Adjustment Procedure For Cab Door Latch And Hold-Open Release {7301,7308}
1996/11/04 New Suspension Frame Group Now Used To Prevent Cracking {7216,7203}
1996/11/11 Follow Correct Maintenance Procedure To Extend Drum Drive Gear Reducer Service Life{5655}
1996/11/11 Service Replacements For Discontinued Piston Pump Groups{5070}
1996/11/11 New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11 New Air Conditioner Evaporator Coil Improves Service Life{7343}
1996/11/11 Proper Retrofitting Of Air Conditioning Refrigerants{7320}
1996/11/11 Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/18 New Compressor Cover Reduces Turbocharger Noise{1060,1052,1801}
1996/11/18 Serviceable Parts Available For Cab Rear Access Panel{7300,7301,7329,6331}
1996/11/18 Stronger Screen In Hydraulic Tank Improves Service Life{5056}
1996/11/18 An Improved Suspension Control Valve Increases Ease Of Operation{7214}
1996/11/18 Special Instruction REHS0018 Available For Installation And Adjustment Of Truck Body {7258}
1996/11/18 New Brake Adjustment Procedure For Improved Inching Ability {3162,4115,4250}