Ordering The Correct Ballstud When Making Drawbar Group Repairs {6170}
Usage:
12G (61M, 3WC, 3PL),
130G (74V, 12W, 59K),
140G (72V, 13W, 5MD, 50H) Motor Graders
The boss has been eliminated from the ballstud used on the drawbar groups on the 12G, 130G and 140G Motor Graders. Both the current 8X-9942 Ballstud and 2G-2411 Ballstud Assemblies are service for making repairs to the drawbar group.
Be sure to check the type of ballstud on the motor grader drawbar being repaired. Order the type of ballstud that matches the ballstuds shown in the illustrations.
Current 8X-9942 Ballstud.
Early 2G-2411 Ballstud Assembly.
Caterpillar Information System:
1995/05/15 Service Life Of The 3Z-4729 Tube Assembly Can Be Increased By Modifying The Mounting Plate For The Combination Valve Group {5057,5064,5084}
1995/05/15 Use Only 1R-0749 High Efficiency Fuel Filter Assembly {1254,1261}
1995/05/08 New Oil Filter Shield And Shield Mounting Screws Used In Oil Filter Base Assemblies{1306}
1995/05/08 Improved Spacer Plate Provides Visual Indication Of Use Of "Wide Flange" Cylinder Liners{1221}
1995/05/08 New Rod Bearings Have Higher Fatigue Strength{1219}
1995/05/08 Oil Filler Group Changes{1316}
1995/05/08 Corrected Altitude Deration Chart {1923,1902}
1995/05/08 New Electronic Control Group (Engine Coolant Temperature Sensor) Used{1906}
1995/05/08 New Front And Rear Crankshaft Seal Groups Used{1160,1161}
1995/05/08 New Plugged Filter Indicator Switch Improves Service Life{7450}
1995/05/08 Larger Bolts Provide Improved Bearing Retention For Increased Fan Bearing Life{1359}
1995/05/08 New Valve Cover And Valve Cover Base Assembly Used{1107,1120}
1995/05/15 Two Stick Cylinders Used To Provide Different Cylinder Strokes {5458}
1995/05/15 New Duo Cone Seal Retainer Provides Increased Face Load {4052}
1995/05/15 New Alternator Guard Available {7168}
1995/05/15 Improved Brackets And New Plates Provide Additional Support For Oil Cooler Groups {1375}
1995/05/15 New Components Added To Radiator Group, Aftercooler Group, Water Lines Group, And Expansion Tank Group Allow Installation Of Coolant Temperature And Coolant Level Sensor {1063,1353,1354,1380}
1995/05/22 New Universal Joint Group Gives Improved Service Life{3253,3251}
1995/05/22 Guard Now Used In Rear Service Brake Lines Group To Prevent Reservoir Cap From Loosening{4291}
1995/05/29 Causes and Prevention Of Guideblock Scuffing{3282}
1995/05/29 New Three Bolt Design For Suspension Cylinder Mount Pin/Retainer Plate{7201}
1995/05/29 New Bolts Used To Improve Refrigerant Compressor Group Mounting{1802}
1995/06/05 Requirement For FLASH Programming Capability{1900,1901}
1995/06/05 118-2990 Stiff Front Cab Mount Available For Backhoe Loaders{7301}