118-2990 Stiff Front Cab Mount Available For Backhoe Loaders{7301}
Usage:
416B (8SG1-Up, 8ZK1-Up),
426B (5YJ1-Up, 6KL1-Up),
428B (7EJ1-Up),
436B (6MJ1-Up, 7FL1-Up),
438B (3KK1-Up),
416 (5PC1-Up),
426 (7BC1-Up),
428 (6TC1-Up),
436 (5KF1-Up),
438 (3DJ1-Up) Backhoe Loaders
The new 118-2990 Mount Assembly replaces the former 9R-0390 Mount Assembly. The new mount assembly is a direct replacement in the models listed above.
Caterpillar Information System:
1995/06/05 Requirement For FLASH Programming Capability{1900,1901}
1995/05/29 New Bolts Used To Improve Refrigerant Compressor Group Mounting{1802}
1995/05/29 New Three Bolt Design For Suspension Cylinder Mount Pin/Retainer Plate{7201}
1995/05/29 Causes and Prevention Of Guideblock Scuffing{3282}
1995/05/22 Guard Now Used In Rear Service Brake Lines Group To Prevent Reservoir Cap From Loosening{4291}
1995/05/22 New Universal Joint Group Gives Improved Service Life{3253,3251}
1995/05/15 New Components Added To Radiator Group, Aftercooler Group, Water Lines Group, And Expansion Tank Group Allow Installation Of Coolant Temperature And Coolant Level Sensor {1063,1353,1354,1380}
1995/05/15 Improved Brackets And New Plates Provide Additional Support For Oil Cooler Groups {1375}
1995/05/15 New Alternator Guard Available {7168}
1995/05/15 New Duo Cone Seal Retainer Provides Increased Face Load {4052}
1995/05/15 Two Stick Cylinders Used To Provide Different Cylinder Strokes {5458}
1995/05/15 Ordering The Correct Ballstud When Making Drawbar Group Repairs {6170}
1995/06/05 New Method Used To Install Fabric Covers For Rear Suspension Cylinders{7201}
1995/06/05 New Intermediate Cylinder Assembly Is Used In The Hoist Cylinder Group{5102}
1995/06/05 New Replacement Screed Plate Is Available{6643}
1995/06/05 Information For Ordering Replacement Cylinder Block For Engine{1201}
1995/06/12 Special Instruction SEHS9874 Available for Challenger Tractors in Scraper Applications{0375,0376,7000,4150}
1995/06/12 Longer Ecology-Type Engine Oil Drain Plug Is Available{1302}
1995/06/12 New Weld Procedure Used On Inner Core Of Rear Wheel Assemblies To Improve Service Life{4208}
1995/06/12 Serviceable Part Available For Air Dryer Assembly{4285}
1995/06/12 Standard Equipment Jake Brake® Improves Braking Capability And Increased Brake Service Life{1119}
1995/06/12 Testing And Adjusting The Hoist System Pressure{5136}
1995/06/12 New Differential And Axle Group Improves Service Life{3278}
1995/06/12 Improved Mounting Brackets And Coupling For Hydraulic Pump{5062}