New Mounting Pin Assemblies For Blade Tip Cylinder {5106}
Usage:
14G (96U6343-Up),
16G (93U2340-Up) Motor Graders
Description of Change: An improved mounting and blade tip cylinder group is used on 14G and 16G Motor Graders. New mounting pin assemblies are used for the blade tip cylinder. The new pin assemblies have a retaining plate welded to one end instead of the lock that was used with the former pins. This will provide better retention of the pin assemblies.
Adaptable To: The improved parts in the 8W3255 Mounting And Blade Tip Cylinder Group, shown in the chart and illustration, are direct replacements for the former parts.
Improved 8W3255 Mounting And Blade Tip Cylinder Group.
Caterpillar Information System:
1988/11/21 One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21 New Oil Seal For Water Pumps Has Hydrodynamic Grooves{1361,1389}
1988/11/21 Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21 Be Sure To Follow Cooling System Recommendations{1350}
1988/11/21 Fabric Seat And Back Cushions Available For Parts Service{7307,7312}
1988/11/21 New Hydraulic Screed Counterbalance System Available{8225}
1988/11/21 Additional Bolts Used In Trunnion Support For Oscillating Axle{3268,7051}
1988/11/21 New Cover Assembly For Hydraulic Oil Return Filter{5068}
1988/11/21 Seat Slide Rail Conversion Kits Available; Includes Extra Heavy-Duty Slide Rails And Improved Seat Release Mechanisms{7312,7321}
1988/11/21 Make Sure Air Conditioner Receiver Is Installed Correctly{7322}
1988/11/14 New Liner Seat Insert Available{1201,1216,1217}
1988/11/14 New Fuel Level Sender Available For Parts Service{1273,7481}
1988/11/28 Improved Wheel And Longer Bolts Provide Better Retention Of Front Brake Disc {4255,4201}
1988/11/28 Stronger, Longer Ring Gear Retainers For Final Drives {4054,4084}
1988/11/28 More Charts And Decals Available For Lubrication And Maintenance Intervals {0374,0375,7500}
1988/12/05 New Air Tank Drain Valve Used{4250,4272}
1988/12/05 Improved Coupler Pin Helps Prevent Cylinder Rod Bending{6129}
1988/12/05 Hydraulic Pressure Settings For Backhoe Loaders{5050,5450}
1988/12/05 Improved Air Conditioner Thermostat Switches Have Tin-Plated Internal Parts{7320}
1988/12/05 Operation Of Feeder Sensor Control{8216}
1988/12/12 Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12 New Operator Monitor Group Used{7490}
1988/12/12 Parts Needed If Air Compressor Tubes Replaced{4257,1803}
1988/12/12 New Switch For Back-Up Alarm{7406}