1988/11/28 Caterpillar


More Charts And Decals Available For Lubrication And Maintenance Intervals {0374,0375,7500}

Usage:


SUPPLEMENT: 10/02/89

SERVICE MAGAZINES: ...FEBRUARY 29, 1988; PAGE 13; "List Of Engine Wall Charts Available" on D379, D398, D399, 3300, 3400, 3500 Families of Engines. ...JUNE 27, 1988; PAGE 3; "Charts and Decals Available for Lubrication and Maintenance Intervals." ...NOVEMBER 28, 1988; PAGE 5; "More Charts And Decals Available For Lubrication And Maintenance Intervals." ...MARCH 6, 1989; PAGE 6; "New Engine Wall Charts Give Maintenance Management Recommendations" for D379, D398, D399, 3114, 3116, 3208, 3300, 3400, 3500 Families of Industrial, Marine and Generator Set Engines.

Disregard these articles and make reference to the new article "Updated List Of Charts And Decals Available For Lubrication And Maintenance Intervals" in this issue.

--------------- END SUPPLEMENT ---------------

More lubrication and maintenance interval charts and decals are now available for certain track-type and wheel-type machines.

The charts give service hour intervals, locations, lubricants, refill capacities and daily walk-around inspection procedures. The charts are produced on oil and tear resistant loose-leaf sheets.

The decals contain service hour intervals, locations, lubricants and refill capacities and can be placed on the machine.

The chart lists all form numbers available at this time and will be updated as more become available for other machines.

Caterpillar Information System:

1988/11/28 Stronger, Longer Ring Gear Retainers For Final Drives {4054,4084}
1988/11/28 Improved Wheel And Longer Bolts Provide Better Retention Of Front Brake Disc {4255,4201}
1988/11/28 New Mounting Pin Assemblies For Blade Tip Cylinder {5106}
1988/11/21 One-Piece Tappet (Follower) Used In 11 mm (Type 2) Fuel Injectors{1290}
1988/11/21 New Oil Seal For Water Pumps Has Hydrodynamic Grooves{1361,1389}
1988/11/21 Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21 Be Sure To Follow Cooling System Recommendations{1350}
1988/11/21 Fabric Seat And Back Cushions Available For Parts Service{7307,7312}
1988/11/21 New Hydraulic Screed Counterbalance System Available{8225}
1988/11/21 Additional Bolts Used In Trunnion Support For Oscillating Axle{3268,7051}
1988/11/21 New Cover Assembly For Hydraulic Oil Return Filter{5068}
1988/11/21 Seat Slide Rail Conversion Kits Available; Includes Extra Heavy-Duty Slide Rails And Improved Seat Release Mechanisms{7312,7321}
1988/12/05 New Air Tank Drain Valve Used{4250,4272}
1988/12/05 Improved Coupler Pin Helps Prevent Cylinder Rod Bending{6129}
1988/12/05 Hydraulic Pressure Settings For Backhoe Loaders{5050,5450}
1988/12/05 Improved Air Conditioner Thermostat Switches Have Tin-Plated Internal Parts{7320}
1988/12/05 Operation Of Feeder Sensor Control{8216}
1988/12/12 Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12 New Operator Monitor Group Used{7490}
1988/12/12 Parts Needed If Air Compressor Tubes Replaced{4257,1803}
1988/12/12 New Switch For Back-Up Alarm{7406}
1988/12/12 New Solenoid Valve For Rotor Lift System{8245}
1988/12/12 New Mounting Bolts Used In Aftercooler Housings{1063,1058}
1988/12/12 Maintenance Procedure Extends Service Life Of Exhaust Manifold Studs{1050}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.