1988/01/04 Caterpillar


Optional Spray Nozzles Available{8227}

Usage:


CB-214 ( 6FD ) And CB-224 ( 6GD ) Compactors

Optional spray nozzles are available for use on CB-214 and CB-224 Dual Drum Vibratory Asphalt Compactors. In some applications, additional water spray may be required for the drums on the machine.

The nozzles, which are made of brass, are available in three different tip opening sizes. The chart gives the part number and specific tip opening size for each nozzle. To order the nozzles, contact Arizona SprayEquip at the address which follows:

Arizona SprayEquip
2615 W. Northern Avenue
Phoenix, AZ 85051
Telephone: 602-995-1111.

Caterpillar Information System:

1988/01/04 Preparing Service Reports For Paving Products{0336,0370,8100,8200}
1988/01/04 New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04 New Hose Assembly Used In Chassis Brake Control Group{4257}
1988/01/04 New Front Suspension Cylinder Assemblies And Relief Valve For Suspension Control Valve Used{7201,7214}
1988/01/04 8T3110 Gauge Assembly And 8T3111 Ring Gear Installer Available{0722}
1988/01/04 Checking Engine Power With A Power Take-Off (PTO) Dynamometer{3107}
1988/01/04 Part Numbers For Bulk Lengths Of Decal Stripes{7557}
1988/01/04 Be Sure To Follow Correct Procedure When Checking Transmission Primary Clutch Pressures With Transmission Installed In Machine{3150}
1988/01/04 New Differential Spool Prevents Shift Hesitation In Power Shift Transmissions{3152,3167}
1978/12/18 Caution: Do Not Change Orifice In Water Outlet Of Auxiliary Pump Group{1371}
1978/12/18 The FT530 Puller Now Can Do The Work Of Three Pullers{0621}
1978/12/18 Longer Bolts Are Now Used To Fasten The Engine Fan Assembly To The Adapter{1356}
1988/01/04 Stronger Drive Plate And Longer Mounting Bolts Used In Drum Mounting Assembly; New Gear Box Mount Used In Propel System{8227}
1988/01/04 New Breather For Pump Drive Gear Box Is Remotely Mounted{3279}
1988/01/04 Shorter Vee Belts Will Increase Clearance Between Alternator And Engine Side Panel{1357}
1988/01/04 Die Cast Flywheel Housing Has Less Weight{1157}
1988/01/25 Improved Radiator Core Assemblies Used In Folded Core Radiators {1353}
1988/01/25 Suction Screen Added Inside Sump Fuel Tank {1273,1274}
1988/01/25 New Undercarriage Reconditioning Bulletin, "Guideline For Reusable Track Parts" {0374,4170}
1988/01/25 New Undercarriage Reconditioning Bulletin-Sealed And Lubricated Track Servicing Procedure For Non-Restrained Track {4150,0374}
1988/01/25 New Worldwide Identification Code Markings Used On Track Link Assemblies For Track-Type Tractors And Loaders {0336,4169,4171}
1988/01/25 New Microfiche Shows Part Numbers And Locations Of Decals And Stripes {0374,7557}
1988/01/25 Stronger Detent Cam Pin Arrangement Used In Selector And Pressure Control Valve Group Of Transmission Hydraulic Controls {3152,3158}
1988/01/25 New Seal Ring Used In Transmission Planetary Groups {3155}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.