8T3110 Gauge Assembly And 8T3111 Ring Gear Installer Available{0722}
Usage:
416, 426, 428 Backhoe Loaders
Reference: Service Manual Module, Disassembly And Assembly, Power Train For Backhoe Loaders, Form SENR3133-01, "Disassemble And Assemble Rear Axle Group," Pages 12-20.
The new 8T3110 Gauge Assembly And 8T3111 Ring Gear Installer are available. These tools are used to help disassemble and assemble the rear axle group on 416, 426, 428 Backhoe Loaders.
The 8T3110 Gauge Assembly provides an accurate method to determine the shim thickness required for correct differential preload.
8T3110 Gauge Assembly.
The 8T3111 Ring Gear Installer can be used to remove and correctly install the ring gear in the axle housing.
8T3111 Ring Gear Installer.
Caterpillar Information System:
1988/01/04 Checking Engine Power With A Power Take-Off (PTO) Dynamometer{3107}
1988/01/04 Part Numbers For Bulk Lengths Of Decal Stripes{7557}
1988/01/04 Be Sure To Follow Correct Procedure When Checking Transmission Primary Clutch Pressures With Transmission Installed In Machine{3150}
1988/01/04 New Differential Spool Prevents Shift Hesitation In Power Shift Transmissions{3152,3167}
1978/12/18 Caution: Do Not Change Orifice In Water Outlet Of Auxiliary Pump Group{1371}
1978/12/18 The FT530 Puller Now Can Do The Work Of Three Pullers{0621}
1978/12/18 Longer Bolts Are Now Used To Fasten The Engine Fan Assembly To The Adapter{1356}
1978/12/18 Specifications For Adjustment Of Bearings On Rear Axle Changed{3270}
1978/12/18 Improved Cylinder Head Gasket Now Used{1101,1201}
1978/12/11 New Electric Service Meter Used{7480}
1978/12/11 New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets{1214,1215}
1978/12/11 New FT1417 Alignment Tool Available For Transmission Carrier Assembly{0622,3150}
1988/01/04 New Front Suspension Cylinder Assemblies And Relief Valve For Suspension Control Valve Used{7201,7214}
1988/01/04 New Hose Assembly Used In Chassis Brake Control Group{4257}
1988/01/04 New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04 Preparing Service Reports For Paving Products{0336,0370,8100,8200}
1988/01/04 Optional Spray Nozzles Available{8227}
1988/01/04 Stronger Drive Plate And Longer Mounting Bolts Used In Drum Mounting Assembly; New Gear Box Mount Used In Propel System{8227}
1988/01/04 New Breather For Pump Drive Gear Box Is Remotely Mounted{3279}
1988/01/04 Shorter Vee Belts Will Increase Clearance Between Alternator And Engine Side Panel{1357}
1988/01/04 Die Cast Flywheel Housing Has Less Weight{1157}
1988/01/25 Improved Radiator Core Assemblies Used In Folded Core Radiators {1353}
1988/01/25 Suction Screen Added Inside Sump Fuel Tank {1273,1274}
1988/01/25 New Undercarriage Reconditioning Bulletin, "Guideline For Reusable Track Parts" {0374,4170}