Part Numbers For Bulk Lengths Of Decal Stripes{7557}
Usage:
All Caterpillar Machines
For sometime all Caterpillar machines have been using the new decals with the double stripes. Part numbers of the double striped decals (films), without any models listed on the film, are not yet listed in the Parts Books. These stripes are available on bulk rolls of film, and the part number is determined by the overall width of the two stripes being replaced. Measure dimension (A) as shown in the illustration. Then refer to the chart for the bulk film part number.
Use dimension (A) to determine which bulk film to order.
Caterpillar Information System:
1988/01/04 Be Sure To Follow Correct Procedure When Checking Transmission Primary Clutch Pressures With Transmission Installed In Machine{3150}
1988/01/04 New Differential Spool Prevents Shift Hesitation In Power Shift Transmissions{3152,3167}
1978/12/18 Caution: Do Not Change Orifice In Water Outlet Of Auxiliary Pump Group{1371}
1978/12/18 The FT530 Puller Now Can Do The Work Of Three Pullers{0621}
1978/12/18 Longer Bolts Are Now Used To Fasten The Engine Fan Assembly To The Adapter{1356}
1978/12/18 Specifications For Adjustment Of Bearings On Rear Axle Changed{3270}
1978/12/18 Improved Cylinder Head Gasket Now Used{1101,1201}
1978/12/11 New Electric Service Meter Used{7480}
1978/12/11 New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets{1214,1215}
1978/12/11 New FT1417 Alignment Tool Available For Transmission Carrier Assembly{0622,3150}
1978/12/04 90° Elbow Added To Air Cleaner Group To Prevent Damage To The Air Filter Service Indicator{1051,7452}
1978/12/04 New Exhaust Valve Has Improved Three-Piece Construction{1105}
1988/01/04 Checking Engine Power With A Power Take-Off (PTO) Dynamometer{3107}
1988/01/04 8T3110 Gauge Assembly And 8T3111 Ring Gear Installer Available{0722}
1988/01/04 New Front Suspension Cylinder Assemblies And Relief Valve For Suspension Control Valve Used{7201,7214}
1988/01/04 New Hose Assembly Used In Chassis Brake Control Group{4257}
1988/01/04 New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04 Preparing Service Reports For Paving Products{0336,0370,8100,8200}
1988/01/04 Optional Spray Nozzles Available{8227}
1988/01/04 Stronger Drive Plate And Longer Mounting Bolts Used In Drum Mounting Assembly; New Gear Box Mount Used In Propel System{8227}
1988/01/04 New Breather For Pump Drive Gear Box Is Remotely Mounted{3279}
1988/01/04 Shorter Vee Belts Will Increase Clearance Between Alternator And Engine Side Panel{1357}
1988/01/04 Die Cast Flywheel Housing Has Less Weight{1157}
1988/01/25 Improved Radiator Core Assemblies Used In Folded Core Radiators {1353}