1988/01/04 Caterpillar

New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}

Usage:

Reference: Special Instruction, Form SEHS763702, "Operation, Maintenance And Parts List Information For Caterpillar Fuel Injection Test Benches."

The new FT2253 Cable Assembly drawing is available to help repair the Kent-Moore Fuel Injection Test Bench. The FT2253 Cable Assembly replaces the former 1U5153 Cable Assembly which is canceled. The FT2253 Cable Assembly connects the counter reset lever to the counter on the fuel injection test bench.

Dealers in NACD, COSA, and Caterpillar Americas can order drawings for Fabricated Tools (FT) from the address that follows. When ordering, be sure to include your dealer code and address so your request will receive immediate attention. All other dealers can order drawings from their Subsidiary Service Departments.

Caterpillar Inc.
AD180 Publications Print Room
600 West Washington Street
East Peoria, IL 61630-0371 (U.S.A.)
Phone: 309-675-7292
Telex: TRT 190425

Caterpillar Information System:

1988/01/04 New Hose Assembly Used In Chassis Brake Control Group{4257}

1988/01/04 New Front Suspension Cylinder Assemblies And Relief Valve For Suspension Control Valve Used{7201,7214}

1988/01/04 8T3110 Gauge Assembly And 8T3111 Ring Gear Installer Available{0722}

1988/01/04 Checking Engine Power With A Power Take-Off (PTO) Dynamometer{3107}

1988/01/04 Part Numbers For Bulk Lengths Of Decal Stripes{7557}

1988/01/04 Be Sure To Follow Correct Procedure When Checking Transmission Primary Clutch Pressures With Transmission Installed In Machine{3150}

1988/01/04 New Differential Spool Prevents Shift Hesitation In Power Shift Transmissions{3152,3167}

1978/12/18 Caution: Do Not Change Orifice In Water Outlet Of Auxiliary Pump Group{1371}

1978/12/18 The FT530 Puller Now Can Do The Work Of Three Pullers{0621}

1978/12/18 Longer Bolts Are Now Used To Fasten The Engine Fan Assembly To The Adapter{1356}

1978/12/18 Specifications For Adjustment Of Bearings On Rear Axle Changed{3270}

1978/12/18 Improved Cylinder Head Gasket Now Used{1101,1201}

1988/01/04 Preparing Service Reports For Paving Products{0336,0370,8100,8200}

1988/01/04 Optional Spray Nozzles Available{8227}

1988/01/04 Stronger Drive Plate And Longer Mounting Bolts Used In Drum Mounting Assembly; New Gear Box Mount Used In Propel System{8227}

1988/01/04 New Breather For Pump Drive Gear Box Is Remotely Mounted{3279}

1988/01/04 Shorter Vee Belts Will Increase Clearance Between Alternator And Engine Side Panel{1357}

1988/01/04 Die Cast Flywheel Housing Has Less Weight{1157}

1988/01/25 Improved Radiator Core Assemblies Used In Folded Core Radiators {1353}

1988/01/25 Suction Screen Added Inside Sump Fuel Tank {1273,1274}

1988/01/25 New Undercarriage Reconditioning Bulletin, "Guideline For Reusable Track Parts" {0374,4170}

1988/01/25 New Undercarriage Reconditioning Bulletin-Sealed And Lubricated Track Servicing Procedure For Non-Restrained Track {4150,0374}

1988/01/25 New Worldwide Identification Code Markings Used On Track Link Assemblies For Track-Type Tractors And Loaders {0336,4169,4171}

1988/01/25 New Microfiche Shows Part Numbers And Locations Of Decals And Stripes {0374,7557}