1977/07/13 Caterpillar


List Of Service Publications

Usage:


This service information has become available since the last list. These forms can be ordered from your Caterpillar dealer to keep reference information current.

Caterpillar Information System:

1977/07/13 Spacers Added To Alternator Group To Improve The Mounting
1977/07/13 Safety Vent Caps For Caterpillar Batteries
1977/06/29 Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps
1977/06/29 Tools To Hone (Machine) Cylinder Liners Are Available To Permit The Use Of Used Cylinder Liners With New Style Pistons
1977/06/29 Socket For Removal And Installation Of Fuel Injection Pump Bushings is Now Stronger
1977/06/29 New Procedure For Calibration Of 1P3060 Pyrometer Group
1977/06/29 List Of Service Publications
1977/06/29 Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures
1977/06/29 Service Tools For Low Emission Truck Engines With EGR
1977/06/29 New Aftercooler Housings And Covers Have Improved Design
1977/06/29 5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/22 Stronger Guide Assembly For Oil Level Gauge Used On Caterpillar-Built Engines In Massey-Ferguson Tractors
1977/07/13 Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13 Use New Procedure To Tighten Flywheel Housing Bolts
1977/07/13 New Seal For Crankshaft
1977/07/13 Baffle Added To Water Pump Cover To Send Coolant In Bypass Line Directly Into The Water Pump
1977/07/13 Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed
1977/07/13 New Inserts To Repair Cylinder Liner Seats On D353 Engine Blocks
1977/08/10 Tools To Install Crankshaft Seal And Wear Sleeve
1977/08/10 New Air Inlet Manifold Has Longer Bolt Bosses With More Thread Depth To Keep Bolts Tight
1977/08/24 New Main And Connecting Rod Bearings Are Made Of Higher Strength Material
1977/08/24 Problems With Oil Or Fuel Filters
1977/08/24 Improved Cylinder Block With Spacer Plates Used With Improved Cylinder Heads And Cylinder Head Gaskets
1977/08/24 New Adjustment Pin And Valve Seal Used In Fuel Ratio Control
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.