1981/06/29 Caterpillar


New Gasket Used In Front Housing Group{1166,1162,1151}

Usage:


All 3304 and 3306 Engines

Description of Change: A new gasket is used in the front housing group on 3304 and 3306 Engines. The new gasket is of a different design, which makes a better seal between the front housing and the plate assembly.

Adaptable As: The new 1W3900 Gasket is a direct replacement for the 8N533 Gasket, which was canceled.

Caterpillar Information System:

1981/06/29 Ring Now Used To Hold Bearing In Auxiliary Drive Group{1165}
1981/06/29 Improvements Give Added Strength To Main Frame{7051}
1981/06/29 Tools To Check Fuel Injection Timing By The Fuel Flow Method{0651,1000,1250}
1981/06/22 New Blade Tip Brackets Used With New Circle And Beam Assembly For Stronger Blade Support{5254,6154}
1981/06/22 Cylinder Liners Can Now Be Reconditioned Automatically{0664,0674,1216}
1981/06/22 6V3145 Leveler Now Available{0644}
1981/06/15 Change To 6V95 Socket; Modification Of Existing Sockets{0612}
1981/06/15 Supplemental Steering Now Automatically Activated{4324,4306,4307}
1981/06/15 Plastic Cases Now Available For Electronic Testing And Diagnostic Equipment{0630,0650}
1981/06/15 New Recommendation To Check Nitrogen Charge In Transmission Accumulators{3167}
1981/06/08 Remanufactured Clutch Plates Available For Power Shift Transmissions{3155,0375}
1981/06/08 Troubleshooting Water In Shut-Off Solenoid Housing{1259}
1981/06/29 Changes Made To Brake Lines And Brake Oil Cooler Lines{4257,1365,5057}
1981/06/29 Coolant Flow Circuit Can Be Added To The Electronic Monitoring System (EMS){7490,1380,1375,1350}
1981/06/29 New Inlet And Exhaust Valves And Valve Guides Have Tighter Fit To Prevent Corrosion And Guide Wear{1104,1105,1101,1103,1108,1109}
1981/06/29 Use 6V4828 Snap Ring Pliers To Remove Snap Rings From Turbocharger Housing{0610,1052}
1981/06/29 New Inlet Lines To Radiator Permit Easier Assembly{1353,1380}
1981/06/29 New Gasket Used For End Cover On Inlet Manifold{1058}
1981/07/06 6V3176 Relief Valve Available For Center Hole Double Acting Hydraulic Cylinders{0623}
1981/07/06 Specifications For Reconditioning Of Final Drive Inner And Outer Housings{4052,4059,4062}
1981/07/06 New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used{1052}
1981/07/06 Mailing Of Engine News And Truck Engine News Microfiche Libraries{0374}
1981/07/06 All Size Identification Marks On Engine Bearings Are Now Shown In Millimeters{1000,1230,1219,1203}
1981/07/06 Single Connector Prevents Leakage From Fuel Filter Lines Groups{1274,1262}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.