Single Connector Prevents Leakage From Fuel Filter Lines Groups{1274,1262}
Usage:
3408;
3412 Industrial And Marine Engines
Description of Change: A single connector is now used instead of the elbows in the fuel filter lines group for 3408 and 3412 Industrial and Marine Engines. Use of the connector decreases possible leakage at the connections.
Adaptable As: The new connector is a direct replacement for the former parts as shown in the chart.
Location of the connector.
Caterpillar Information System:
1981/07/06 All Size Identification Marks On Engine Bearings Are Now Shown In Millimeters{1000,1230,1219,1203}
1981/07/06 Mailing Of Engine News And Truck Engine News Microfiche Libraries{0374}
1981/07/06 New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used{1052}
1981/07/06 Specifications For Reconditioning Of Final Drive Inner And Outer Housings{4052,4059,4062}
1981/07/06 6V3176 Relief Valve Available For Center Hole Double Acting Hydraulic Cylinders{0623}
1981/06/29 New Gasket Used For End Cover On Inlet Manifold{1058}
1981/06/29 New Inlet Lines To Radiator Permit Easier Assembly{1353,1380}
1981/06/29 Use 6V4828 Snap Ring Pliers To Remove Snap Rings From Turbocharger Housing{0610,1052}
1981/06/29 New Inlet And Exhaust Valves And Valve Guides Have Tighter Fit To Prevent Corrosion And Guide Wear{1104,1105,1101,1103,1108,1109}
1981/06/29 Coolant Flow Circuit Can Be Added To The Electronic Monitoring System (EMS){7490,1380,1375,1350}
1981/06/29 Changes Made To Brake Lines And Brake Oil Cooler Lines{4257,1365,5057}
1981/06/29 New Gasket Used In Front Housing Group{1166,1162,1151}
1981/07/06 Use 6V4068 Tool Group To Machine Camshaft Thrust Face{0663,1253}
1981/07/13 Add New Information To Two Current Guidelines For Reusable Parts{0374}
1981/07/13 Use 6V4805 Valve Seat Extractor Group To Remove Valve Seat Inserts{0621}
1981/07/13 Top Rings For Pistons Have Two Designs{1215,1214}
1981/07/13 Coolant Conditioner Elements And Their Capacities{1350}
1981/07/13 New Circle Guide Shoes Can Be Adjusted For Better Control Of Clearance Between Circle Teeth And Drive Pinion{6155,6153}
1981/07/13 Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13 Washer, Seal Added To Improve Oil Filter Assembly{1306,1318}
1981/08/03 New Hydraulic Accumulator Group Used In The Steering System{4300,5077}
1981/08/03 Delay Expected In Replacement Of Canceled Service Tools{0651}
1981/08/03 New Circle Drive Shaft{5237}
1981/08/03 New Information System For Engine Gasket Kits{7555}