Plastic Cases Now Available For Electronic Testing And Diagnostic Equipment{0630,0650}
Usage:
Plastic cases are now available for storage and protection of electronic testing and diagnostic equipment and other general purpose uses (see Illustration). The cases are impact-resistant and have a textured (rough) surface to prevent scratches. The different types of cases and their dimensions are given in the chart which follows.
Plastic storage case. See the chart for letter references.
Plastic storage case. See the chart for letter references.
Plastic storage case. See the chart for letter references.
Plastic storage case. See the chart for letter references.
Caterpillar Information System:
1981/06/15 New Recommendation To Check Nitrogen Charge In Transmission Accumulators{3167}
1981/06/08 Remanufactured Clutch Plates Available For Power Shift Transmissions{3155,0375}
1981/06/08 Troubleshooting Water In Shut-Off Solenoid Housing{1259}
1981/06/08 Spring-Activated Brake Lock (Parking Brake) Now Used{4115,4114,4112,4111}
1981/06/08 Inspect Piston Skirts During Engine Overhaul Procedures{1214,1213}
1981/06/01 Some Single Part Numbers Have Two Half Bearings{7551}
1981/06/01 Correct Use Of Keystone Ring Groove Gauges{1214,1215,1312,0653}
1981/05/25 Use FT1612 Pump Tool To Adjust Servo Valve In Piston Type Hydraulic Pump{0654,5070}
1981/05/25 Stronger Studs, Increased Torque Now Used In Front Wheel Brake Group{4251}
1981/05/25 Washer Added Between Bolt And Thrust Plate For Oil Pump Idler Gear{1206}
1981/05/25 Use Correct Specifications To Check Piston Ring Gaps{1215}
1981/05/25 Instruction Cards For "Go-No Go" Gauges Now Available{0653}
1981/06/15 Supplemental Steering Now Automatically Activated{4324,4306,4307}
1981/06/15 Change To 6V95 Socket; Modification Of Existing Sockets{0612}
1981/06/22 6V3145 Leveler Now Available{0644}
1981/06/22 Cylinder Liners Can Now Be Reconditioned Automatically{0664,0674,1216}
1981/06/22 New Blade Tip Brackets Used With New Circle And Beam Assembly For Stronger Blade Support{5254,6154}
1981/06/29 Tools To Check Fuel Injection Timing By The Fuel Flow Method{0651,1000,1250}
1981/06/29 Improvements Give Added Strength To Main Frame{7051}
1981/06/29 Ring Now Used To Hold Bearing In Auxiliary Drive Group{1165}
1981/06/29 New Gasket Used In Front Housing Group{1166,1162,1151}
1981/06/29 Changes Made To Brake Lines And Brake Oil Cooler Lines{4257,1365,5057}
1981/06/29 Coolant Flow Circuit Can Be Added To The Electronic Monitoring System (EMS){7490,1380,1375,1350}
1981/06/29 New Inlet And Exhaust Valves And Valve Guides Have Tighter Fit To Prevent Corrosion And Guide Wear{1104,1105,1101,1103,1108,1109}