Usage:
NOTE: Check the condition of all O-ring seals and of all parts. If any components are worn or damaged, use new parts for replacement.
1. Install O-ring seal (5) on the secondary steering pump, as shown.
2. Put secondary steering pump (3) in position on the output transfer gearbox, as shown. Install four nuts (4) and the washers that hold secondary steering pump (3) to the output transfer gearbox.
3. Connect hose assemblies (1) and (2) to secondary steering pump (3).
4. Fill the hydraulic tank with oil to the correct level. Refer to Operation and Maintenance Manual for the machine that is being serviced.
End By:
a. Remove the steering frame lock pin. Refer to Disassembly and Assembly, "Steering Frame Lock Pin - Remove and Install" for the machine that is being serviced.