Revised Systems Operation, Testing And Adjusting Manual For 3612 And 3616 Diesel Engines Is Available {1000}
Usage:
3612 (9RC3616 (1PD) Engines
A revised Systems Operation, Testing And Adjusting Manual; SENR3593-02; is now available. The manual contains basic information on all systems of the 3612 And 3616 Diesel Engines. The manual also includes testing and adjusting techniques for these engine systems. Some of the most important changes in this latest revision of the manual include:
-
- * Updated Governor/Actuator Linkage Procedures
- * Expanded Dial Indicator Fuel Setting Chart
- * Additions To The Troubleshooting Section
- * Updated Illustrations
- * Updated Governor/Actuator Linkage Procedures
Caterpillar Information System:
1997/08/01 New Electronic Control Group Available For Gas Engine Ignition Groups {1550,1559}
1997/08/01 Reliability And Fatigue Strength Improved In Connecting Rod {1218,1219}
1997/08/01 Improved Clamps For Turbocharger Exhaust Couplings Reduce Exhaust Leaks {1052}
1997/08/01 Troubleshooting Data Sheet For Diesel Engines {1000}
1997/08/01 New Software Available For Improvements To Marine Engines {1920}
1997/08/01 Pipe Plug Used On Electronic Control Group (MAPS Sensor) {1917}
1997/08/01 Correct Procedure For Installing Hydraulically Actuated Electronic Unit Injectors (HEUI) {1290}
1997/08/01 Tube Is Available To Raise The Rain Cap In Order To Avoid Interference With The Inlet Manifold {1051}
1997/07/01 New Fuel Injector Group Eliminates Corrosion Between Fuel Injector And Cylinder Head{1290}
1997/07/01 Updated Connecting Rod Bolt Tightening Procedure{1218}
1997/07/01 Soot Filter (Silencer) Available For Silencer Groups{1051}
1997/07/01 New Coolant Level Sensor Used In Water Tank Groups{7422}
1997/08/01 New Turbocharger Wash Water Lines Groups Used {1052}
1997/08/01 New Specification For Clearance Between Turbocharger Turbine Wheel Blades And Turbine Wheel Cover Ring {1052}
1997/08/01 Air Quality Requirements For Turbocharger Air Impingement System {1052}
1997/08/01 Changes To Cylinder Head Salvage Procedure {1100}
1997/08/01 Installation Procedure For Cylinder Head Studs {1100}
1997/08/01 New Manual Valve Group [Measure Cylinder Pressure (Kiene® Valve)] Used; Kiene Valve Installation Procedure {1100,1118}
1997/08/01 Revised Starting Procedure For Engines Using Kiene Valves {1100}
1997/08/01 New Torque Specification For Some Bolts In Valve Mechanism Group {1102,1123}
1997/08/01 Crankshaft Oil Passage Plugs {1202}
1997/08/01 Connecting Rod Bearing Part Numbers {1203,1219,1230}
1997/08/01 Procedures For Changing From Running On Heavy Fuel Oil (HFO) To Running On Distillate Fuel {1280}
1997/08/01 New Gear Assemblies With A Stronger Shaft Are Used In Governor Drive Groups {1288}