Usage:
3600 Family Of Engines
This article replaces the article with the same title in the January 1993 issue.
When a 7W-1632 Plug is removed from a crankshaft, the plug can be reused if the following procedure is followed or a new plug can be installed.
If reusing the 7W-1632 Plug that was removed:
1. The threads on the plug and in the crankshaft must be thoroughly cleaned.
2. Put a coating of 4C-4032 Bearing Mount Compound on the plug threads.
3. Install the 7W-1632 Plug in the crankshaft and tighten the plug to a torque of 300 ± 40 N·m (220 ± 30 lb ft).
If installing a new 7W-1632 Plug:
1. Thoroughly clean the threads in the crankshaft.
2. A new 7W-1632 Plug comes with coating of retaining compound already applied.
3. Install the new 7W-1632 Plug in the crankshaft and tighten the plug to a torque of 300 ± 40 N·m (220 ± 30 lb ft).