Fuel Filter Base
Usage:
Remove Fuel Filter Base
1. Disconnect fuel supply line (3) and fuel return line (1).
2. Remove filter housing (4) for primary fuel filter.
3. Disconnect line (2) from filter base.
4. Remove both fuel filters (5).
5. Remove five bolts that hold filter base to accessory drive housing. Remove filter base.
Install Fuel Filter Base
1. Install fuel filter base (1) on accessory drive housing. Install the five bolts.
2. Connect line (2) to filter base.
3. Install filter housing for primary fuel filter.
4. Connect the fuel supply line and fuel return line.
5. Fill the two fuel filters with fuel and install them on the filter base.
Caterpillar Information System:
NO. 16 ENGINE Fuel Transfer Pump
NO. 16 ENGINE Transfer Pump
NO. 16 ENGINE Fuel Priming Pump
3204 VEHICULAR ENGINE Testing And Adjusting
3204 VEHICULAR ENGINE Systems Operation
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Scarifier Teeth
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Scarifier Frame And Drawbar
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Scarifier Control
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Power Control
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Power Control Drive Shaft
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Circle Centershift Housing
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Circle Centershift Rack
NO. 16 ENGINE Oil Filter Base
NO. 16 ENGINE Engine Oil Cooler
NO. 16 ENGINE Fuel Injection Pump Housing And Governor
NO. 16 ENGINE Governor
NO. 16 ENGINE Fuel Injection Pump Housing
NO. 16 ENGINE Variable Timing Unit
NO. 16 ENGINE Accessory Drive Housing
NO. 16 ENGINE Connecting Rod Bearings
NO. 16 ENGINE Starter
NO. 16 ENGINE Alternator
NO. 16 ENGINE Water Pump
NO. 16 ENGINE Oil Pan