Engine Oil Cooler
Usage:
Remove Engine Oil Cooler
1. Remove the coolant from the cooling system.
2. Remove the oil outlet line (1) from the oil cooler.
3. Remove the oil inlet line from the oil cooler.
4. Loosen hose clamp (2).
5. Remove bolts (3) from the oil cooler.
6. Remove the oil cooler.
Install Engine Oil Cooler
1. Put the oil cooler in place on the engine.
2. Install the bolts and tighten the hose clamp.
3. Install the oil inlet line and oil outlet line on the oil cooler.
4. Fill the engine cooling system with coolant.
5. Start engine and check oil level and coolant level.
Caterpillar Information System:
NO. 16 ENGINE Oil Filter Base
NO. 16 ENGINE Fuel Filter Base
NO. 16 ENGINE Fuel Transfer Pump
NO. 16 ENGINE Transfer Pump
NO. 16 ENGINE Fuel Priming Pump
3204 VEHICULAR ENGINE Testing And Adjusting
3204 VEHICULAR ENGINE Systems Operation
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Scarifier Teeth
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Scarifier Frame And Drawbar
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Scarifier Control
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Power Control
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Power Control Drive Shaft
NO. 16 ENGINE Fuel Injection Pump Housing And Governor
NO. 16 ENGINE Governor
NO. 16 ENGINE Fuel Injection Pump Housing
NO. 16 ENGINE Variable Timing Unit
NO. 16 ENGINE Accessory Drive Housing
NO. 16 ENGINE Connecting Rod Bearings
NO. 16 ENGINE Starter
NO. 16 ENGINE Alternator
NO. 16 ENGINE Water Pump
NO. 16 ENGINE Oil Pan
NO. 16 ENGINE Oil Pump
NO. 16 ENGINE Oil Pump Drive