Power Control Drive Shaft
Usage:
Remove Power Control Drive Shaft
1. Remove the bolts and nuts that hold floor plate (1) to the frame. Remove floor plate.
2. Remove the eight bolts (3) and locks from the shaft.
3. Remove drive shaft (2) for the power control.
Install Power Control Drive Shaft
1. Put the drive shaft (1) for the power control into position.
2. Install the four locks and eight bolts (2) in position on the drive shaft.
3. Install the floor plate. Install the bolts that hold the floor plate to the frame.
Caterpillar Information System:
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Circle Centershift Housing
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Circle Centershift Rack
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Ball And Socket Adjustment,
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Circle Reverse Gear Housing
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Circle Reverse Transfer Gear Housing
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Circle Drawbar
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Circle Assembly And Blade
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Blade Sideshift Control
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Blade Assembly
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Blade Lift Drive Housings
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Blade Lift Arms
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Junction
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Power Control
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Scarifier Control
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Scarifier Frame And Drawbar
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS Scarifier Teeth
3204 VEHICULAR ENGINE Systems Operation
3204 VEHICULAR ENGINE Testing And Adjusting
NO. 16 ENGINE Fuel Priming Pump
NO. 16 ENGINE Transfer Pump
NO. 16 ENGINE Fuel Transfer Pump
NO. 16 ENGINE Fuel Filter Base
NO. 16 ENGINE Oil Filter Base
NO. 16 ENGINE Engine Oil Cooler