1994/10/01 Caterpillar


New Governor Control Assembly to Improve Acuator Stability {1289}

Usage:


G3408 (6NB, 6RJ),
G3412 (7DB, 3NK, 6ZM) Engines

Description of Change: A new governor control assembly has a 7 Hz low pass speed filter which increases actuator stability. The new control assembly works with G3400 Woodward actuators (primarily used on gensets).

Currently, engines use a control assembly with a 15 Hz low pass speed input filter. This control assembly may show signs of instability in the actuator. If the gain dial on the 15 Hz control assembly is adjusted and the engine is still unstable, use the new 7 Hz control assembly.

Adaptable To: The new 118-5449 Governor Control Assembly can be used as a direct replacement for the 4W-5393 Governor Control Assembly.

Caterpillar Information System:

1994/10/01 Adjustment Of Air/Fuel Ratio Control Setting {1278}
1994/10/01 New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material {1205}
1994/10/01 Fuel Priming Pump Can Be Installed On Either Left Or Right Side Service Fuel Filter Groups {1258}
1994/10/01 New Rear Crankshaft Seal Groups Available {1161}
1994/09/01 Different Emergency Stop Push Buttons for Electronic Modular Control Panel II (EMCP II) {4490,4450}
1994/09/01 Reworking Diesel And Gas Cylinder Heads On 6.25 Bore V Engines {1101}
1994/09/01 New Rear Camshaft Segments With Stronger Camshaft Flange Used {1210}
1994/09/01 Use Thread Lock On Bolts That Fasten Aftercooler Housing To Cylinder Block {1063}
1994/09/01 Turbocharger Turbine Nozzle Reusability Information {1052}
1994/09/01 New Operation And Maintenance Videos Available {0374}
1994/09/01 Improved Knock (Detonation) Sensor Group Replaces Detonation Sensor {1559}
1994/09/01 New Gasket Used In The Water Lines Group {1380}
1994/10/01 New Spark Plug Tightening Specifications For Engines With Canadian Standards Association (CSA) Ignitions {1550}
1994/10/01 Longer Inch Cylinder Head Bolt Provides Increased Thread Engagement {1100}
1994/10/01 Remanufactured Crankshaft Interchangeability; Remanufactured "Upgrade To New" (UTN) Availability {1202}
1994/10/01 New Higher Capacity Oil Pump Used {1304}
1994/10/01 New Gas Pressure Regulator Assembly Used To Provide Increased Parts Commonality {5503}
1994/10/01 New 106-7408 Engine Oil Film (Decal) Available {7557}
1994/10/01 New Intake Valve Lash Setting {1105}
1994/10/01 New Prechamber Assembly Used In Prechamber Group; New Specifications For Prechamber Group {1106}
1994/10/01 Repair Kit Is Available For Long Stroke Fuel Ratio Control Group Used With 3161 Governors {1278}
1994/10/01 Procedure For Tightening 067-9921 Tee In 9Y-3300 Prelube Pump Oil Lines Group {1307,1319}
1994/10/01 Additional Clamps Added To Air Cleaner Adapter Group For G3600 Engines {5502}
1994/10/01 Tightening Specification for Combustion Sensor {1900}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.