New Gasket Used In The Water Lines Group {1380}
Usage:
3500 Family Of Commercial Engines
Description of Change: A new gasket is used in the water lines group for the 3500 Family Of Commercial Engines. The new gasket is more resistant to leaks than the former gasket.
Adaptable To: The new 110-4789 Gasket is a direct replacement for the former 8N-7640 Gasket in the water lines groups.
Location of the 110-4789 Gasket (1). Front view is shown.
Caterpillar Information System:
1994/09/01 New Plunger In Fuel Pressure Regulating Valve {1250}
1994/09/01 New Cylinder Liner, Spacer Plate, Spacer Plate Gasket, And Cylinder Head Gasket Used {1216,1221,1124}
1994/09/01 New Gears And Pipe Plugs In Auxiliary Drive Group {1150,1165}
1994/09/01 New Gasket Provides Improved Sealing Between Air Compressor And Drive {1803}
1994/09/01 New PSG Governor With Pneumatic Air Head Control Available {1264}
1994/09/01 New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance {1251}
1994/09/01 Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems {1105}
1994/09/01 Different Valves And Valve Seats Used In Remanufactured Cylinder Head Groups {1103,1105}
1994/09/01 Longer Studs And Spacers Used To Retain Exhaust Manifolds {1059}
1994/09/01 New Turbocharger Increases G3412 Engine Performance {1052}
1994/09/01 New Fuel Priming Pump Assembly Used In Fuel Priming Pump Group {1258}
1994/09/01 Improved Fuel Pump Bonnet Seals Have Better Heat Resistance {1251}
1994/09/01 Improved Knock (Detonation) Sensor Group Replaces Detonation Sensor {1559}
1994/09/01 New Operation And Maintenance Videos Available {0374}
1994/09/01 Turbocharger Turbine Nozzle Reusability Information {1052}
1994/09/01 Use Thread Lock On Bolts That Fasten Aftercooler Housing To Cylinder Block {1063}
1994/09/01 New Rear Camshaft Segments With Stronger Camshaft Flange Used {1210}
1994/09/01 Reworking Diesel And Gas Cylinder Heads On 6.25 Bore V Engines {1101}
1994/09/01 Different Emergency Stop Push Buttons for Electronic Modular Control Panel II (EMCP II) {4490,4450}
1994/10/01 New Rear Crankshaft Seal Groups Available {1161}
1994/10/01 Fuel Priming Pump Can Be Installed On Either Left Or Right Side Service Fuel Filter Groups {1258}
1994/10/01 New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material {1205}
1994/10/01 Adjustment Of Air/Fuel Ratio Control Setting {1278}
1994/10/01 New Governor Control Assembly to Improve Acuator Stability {1289}