Films - Install
Parts and Specification Information
Note: Verify that all parts are shipped and undamaged for preparation of assembly. Missing or damaged parts can be ordered prior to assembly to avoid delays during assembly.
Show/hide table
Item | Part Number | Description | Qty | Specification | Approximate Weight |
1 | 450-6701 | Film | 1 | ||
2 | 299-7935 | Film | 1 | ||
3 | 499-6702 | Film | 1 | ||
4 | 499-6703 | Film | 1 | ||
5 | 279-9304 | Film | 1 | ||
6 | 450-6704 | Film | 1 |
Climbing equipment may be required to access this service point. Refer to the Operation and Maintenance Manual, "Mounting and Dismounting" topic for safety information.
Show/hide table
Do not attempt to assemble this machine until you read and you understand the assembly instructions. Improper assembly procedures could result in injury or death. |
- Install film (1) on the center of the front radiator.
- Install film (2)
170 mm (6.7 inch) from the bottom of the canopy and50 mm (2 inch) from the angle. - Install film (3) on the left side of the body
30 mm (1.2 inch) from the top and side. - Install film (4) on the right side of the body
30 mm (1.2 inch) from the top and side.Show/hide tableIllustration 3 g03865239 (E) 210 mm (8.25 inch)
(F)10 mm (0.4 inch)
(G)110 mm (4.3 inch)
(H)10 mm (0.4 inch) - Install film (5) to the side of the cab
110 mm (4.3 inch) from the edge of the door and210 mm (8.25 inch) from the bottom. - Install film (6) to the side of the cab
10 mm (0.4 inch) from the bottom and side.
Show/hide table
Illustration 1 | g06336401 |
Show/hide table
Illustration 2 | g06336411 |
(A) (B) (C) (D) |
Note: Insure all surfaces are clean and free of dirt or debris before applying films.
Caterpillar Information System:
New Cylinder Pack Components are Now Used On Certain 3512 and 3516 Engines {1214, 1215} New Cylinder Pack Components are Now Used On Certain 3512 and 3516 Engines {1214, 1215}
Fuel Filter May Leak on Certain 3406, 3412, C9, C9.3, C13, C15, and C18Engines {1260, 1261, 1262} Fuel Filter May Leak on Certain 3406, 3412, C9, C9.3, C13, C15, and C18Engines {1260, 1261, 1262}
308 Mini Hydraulic Excavators Maintenance Interval Schedule
New Software Is Now Used for Certain C175-16 Engines {7620} New Software Is Now Used for Certain C175-16 Engines {7620}
An Improved Engine Oil Lines on Certain G3500H HD Engines {1307, 1469} An Improved Engine Oil Lines on Certain G3500H HD Engines {1307, 1469}
G3500H 60Hz Generator Sets Flexible Coupling (Silicone Compression) - Inspect
G3500H 60Hz Generator Sets Flexible Coupling (Rubber) - Inspect
Rework Procedure for Generator Sets with the 262-8196 Generator Arrangement {4450} Rework Procedure for Generator Sets with the 262-8196 Generator Arrangement {4450}
C175 Tier 4 Final Engines for Caterpillar Built Machines Flywheel Housing - Remove
Installation Procedure of the Front and Left Side Camera on Certain 320 and 323 Next Generation Excavators {7348} Installation Procedure of the Front and Left Side Camera on Certain 320 and 323 Next Generation Excavators {7348}
120 and 120 AWD Motor Grader Circle Clearances - Check/Adjust
308 Mini Hydraulic Excavators Front Control System - If Equipped
797F Tier 4 Off-Highway Truck Field Assembly Engine Aftertreatment System - Install
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Engine Oil Filter Base - Remove and Install
797F Tier 4 Off-Highway Truck Engine Supplement Engine and Torque Converter - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Front Idler and Track Adjuster - Remove
Installation of the 561-2355 Oil Cooler Lines Gp on Certain Next Generation Hydraulic Excavators {1378} Installation of the 561-2355 Oil Cooler Lines Gp on Certain Next Generation Hydraulic Excavators {1378}
Installation of the 558-1387 Front Lines Gp on Certain Next Generation Hydraulic Excavators {5057} Installation of the 558-1387 Front Lines Gp on Certain Next Generation Hydraulic Excavators {5057}
AC Compressor May Not Function Properly on Certain 320, 320 GC, and 323 Excavators {1802} AC Compressor May Not Function Properly on Certain 320, 320 GC, and 323 Excavators {1802}
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Engine Oil Cooler - Remove and Install
A New Wastegate Shaft Part Number Released for G3600 Engines {1057} A New Wastegate Shaft Part Number Released for G3600 Engines {1057}
Certain G3500H Engines with CCV have Oil Carryover {1074} Certain G3500H Engines with CCV have Oil Carryover {1074}
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Water Pump - Remove
New Cylinder Liner is Now Used on Certain C32 Marine Engines {1216} New Cylinder Liner is Now Used on Certain C32 Marine Engines {1216}