Engine Oil Filter Base - Remove and Install
- Drain the engine oil. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Show/hide table
Illustration 1 g06335766 - Remove 12 bolts (1), four nuts (2), two bolts (3), two bolts (4), and engine oil filter base (5).
- Install engine oil filter base (5) in the reverse order of removal.
- Tighten bolts (3) and (4) to a torque of
22.5 ± 3.5 N·m (199 ± 31 lb in) .
- Tighten bolts (3) and (4) to a torque of
Caterpillar Information System:
797F Tier 4 Off-Highway Truck Field Assembly Engine Aftertreatment System - Install
794 AC Off-Highway Truck Field Assembly Films - Install
New Cylinder Pack Components are Now Used On Certain 3512 and 3516 Engines {1214, 1215} New Cylinder Pack Components are Now Used On Certain 3512 and 3516 Engines {1214, 1215}
Fuel Filter May Leak on Certain 3406, 3412, C9, C9.3, C13, C15, and C18Engines {1260, 1261, 1262} Fuel Filter May Leak on Certain 3406, 3412, C9, C9.3, C13, C15, and C18Engines {1260, 1261, 1262}
308 Mini Hydraulic Excavators Maintenance Interval Schedule
New Software Is Now Used for Certain C175-16 Engines {7620} New Software Is Now Used for Certain C175-16 Engines {7620}
An Improved Engine Oil Lines on Certain G3500H HD Engines {1307, 1469} An Improved Engine Oil Lines on Certain G3500H HD Engines {1307, 1469}
G3500H 60Hz Generator Sets Flexible Coupling (Silicone Compression) - Inspect
G3500H 60Hz Generator Sets Flexible Coupling (Rubber) - Inspect
Rework Procedure for Generator Sets with the 262-8196 Generator Arrangement {4450} Rework Procedure for Generator Sets with the 262-8196 Generator Arrangement {4450}
C175 Tier 4 Final Engines for Caterpillar Built Machines Flywheel Housing - Remove
Installation Procedure of the Front and Left Side Camera on Certain 320 and 323 Next Generation Excavators {7348} Installation Procedure of the Front and Left Side Camera on Certain 320 and 323 Next Generation Excavators {7348}
797F Tier 4 Off-Highway Truck Engine Supplement Engine and Torque Converter - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Front Idler and Track Adjuster - Remove
Installation of the 561-2355 Oil Cooler Lines Gp on Certain Next Generation Hydraulic Excavators {1378} Installation of the 561-2355 Oil Cooler Lines Gp on Certain Next Generation Hydraulic Excavators {1378}
Installation of the 558-1387 Front Lines Gp on Certain Next Generation Hydraulic Excavators {5057} Installation of the 558-1387 Front Lines Gp on Certain Next Generation Hydraulic Excavators {5057}
AC Compressor May Not Function Properly on Certain 320, 320 GC, and 323 Excavators {1802} AC Compressor May Not Function Properly on Certain 320, 320 GC, and 323 Excavators {1802}
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Engine Oil Cooler - Remove and Install
A New Wastegate Shaft Part Number Released for G3600 Engines {1057} A New Wastegate Shaft Part Number Released for G3600 Engines {1057}
Certain G3500H Engines with CCV have Oil Carryover {1074} Certain G3500H Engines with CCV have Oil Carryover {1074}
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Water Pump - Remove
New Cylinder Liner is Now Used on Certain C32 Marine Engines {1216} New Cylinder Liner is Now Used on Certain C32 Marine Engines {1216}
Incorrect Panel Harness Assembly is Installed on Certain XQ125 Generator Set Engines {1408, 4490, 7490} Incorrect Panel Harness Assembly is Installed on Certain XQ125 Generator Set Engines {1408, 4490, 7490}
Electrical Connection Group Installed Incorrectly on Certain XQ125 Generator Set Engines {1408, 445B} Electrical Connection Group Installed Incorrectly on Certain XQ125 Generator Set Engines {1408, 445B}