Piston Motor (Fan Drive)
Show/hide table
Illustration 1 | g06262235 |
Front of Machine (1) Cooling fan motor |
Cooling fan motor (1) is located in the compartment at the rear of the machine. Removal of the rear grill allows access to this component.
Cooling fan motor (1) is a piston-type motor with a fixed displacement. The displacement is
Caterpillar Information System:
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Stopping the Machine
Retrofitting for the Dynamic Gas Blending Capability on Certain 3516B Engines {1071, 1100, 1250, 1270, 1274, 1403, 1716, 1901, 1920} Retrofitting for the Dynamic Gas Blending Capability on Certain 3516B Engines {1071, 1100, 1250, 1270, 1274, 1403, 1716, 1901, 1920}
Selective Catalytic Reduction Retrofit Aftertreatment Diesel Particulate Filter - Remove and Install - If Equipped
C7.1 Marine Propulsion Engine Flywheel - Remove and Install
C7.1 Marine Propulsion Engine Electric Starting Motor - Remove and Install
C7.1 Marine Propulsion Engine Auxiliary Water Pump - Assemble
C7.1 Marine Propulsion Engine Auxiliary Water Pump - Disassemble
Improved Camera is Now Used on Certain Cat® Products {1408} Improved Camera is Now Used on Certain Cat® Products {1408}
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Valve Mechanism Cover - Remove and Install
New Diesel Exhaust Fluid Pump Connector is Now Used on Certain C7.1 - C18 Engine Applications {108J} New Diesel Exhaust Fluid Pump Connector is Now Used on Certain C7.1 - C18 Engine Applications {108J}
3516C HD Generator Set with Gearbox General Hazard Information
C7.1 Marine Propulsion Engine Auxiliary Water Pump - Remove and Install
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Hydraulic Schematic (Hydraulic Fan)
3500E Marine Engines On-Board Replacement Parts
C175-20 Locomotive Engine Injector Solenoid - Test
C7.1 Marine Propulsion Engine Crankcase Breather - Remove
C7.1 Marine Propulsion Engine Crankcase Breather - Install
New Turbochargers are Now Used on Certain 3512C and 3516C Marine Engines {1052, 1053} New Turbochargers are Now Used on Certain 3512C and 3516C Marine Engines {1052, 1053}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Blade Operation
An Audible Knock Is Heard on Certain 3500 Dynamic Gas Blending Engines {1278, 1280, 1741} An Audible Knock Is Heard on Certain 3500 Dynamic Gas Blending Engines {1278, 1280, 1741}
New Oil Cooler Components Are Now Used for Certain G3500 Series Engines {1378} New Oil Cooler Components Are Now Used for Certain G3500 Series Engines {1378}
C280-16 Marine Engines Ordering Replacement Parts
A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467} A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Operator Controls