Auxiliary Water Pump - Assemble
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576.
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Loctite 277 | - |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Ensure that all components are clean and free from wear or damage. Refer to Specifications, "Auxiliary Water Pump" for more information. If necessary, replace any components that are worn or damaged.
Show/hide table
Illustration 1 | g06262282 |
Show/hide table
Illustration 2 | g06262283 |
Show/hide table
Illustration 3 | g06262284 |
Show/hide table
Illustration 4 | g06262285 |
Show/hide table
Illustration 5 | g06262286 |
Show/hide table
Illustration 6 | g06262287 |
Show/hide table
Illustration 7 | g06262288 |
Show/hide table
Illustration 8 | g06262289 |
Show/hide table
Illustration 9 | g06262290 |
Show/hide table
Illustration 10 | g06262291 |
Note: The blades of the impeller should be oriented in a clockwise direction.
Show/hide table
Illustration 11 | g06262292 |
Show/hide table
Illustration 12 | g06262293 |
Show/hide table
Illustration 13 | g06262294 |
End By:
- Install the auxiliary water pump.
Caterpillar Information System:
C7.1 Marine Propulsion Engine Auxiliary Water Pump - Disassemble
Improved Camera is Now Used on Certain Cat® Products {1408} Improved Camera is Now Used on Certain Cat® Products {1408}
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Valve Mechanism Cover - Remove and Install
New Diesel Exhaust Fluid Pump Connector is Now Used on Certain C7.1 - C18 Engine Applications {108J} New Diesel Exhaust Fluid Pump Connector is Now Used on Certain C7.1 - C18 Engine Applications {108J}
3516C HD Generator Set with Gearbox General Hazard Information
C7.1 Marine Propulsion Engine Auxiliary Water Pump - Remove and Install
C7.1 Marine Propulsion Engine Transmission Oil Cooler - Remove and Install
C7.1 Marine Propulsion Engine Transmission Oil Temperature Sensor - Remove and Install
C7.1 Marine Propulsion Engine Transmission Oil Pressure Sensor - Remove and Install
793F Off-Highway Truck Engine Supplement Diesel Exhaust Fluid Filter - Remove and Install
3516C HD Generator Set with Gearbox Reference Information
C175 Tier 4 Final Engines for Caterpillar Built Machines Catalyst (SCR) - Remove and Install
C7.1 Marine Propulsion Engine Electric Starting Motor - Remove and Install
C7.1 Marine Propulsion Engine Flywheel - Remove and Install
Selective Catalytic Reduction Retrofit Aftertreatment Diesel Particulate Filter - Remove and Install - If Equipped
Retrofitting for the Dynamic Gas Blending Capability on Certain 3516B Engines {1071, 1100, 1250, 1270, 1274, 1403, 1716, 1901, 1920} Retrofitting for the Dynamic Gas Blending Capability on Certain 3516B Engines {1071, 1100, 1250, 1270, 1274, 1403, 1716, 1901, 1920}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Stopping the Machine
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Piston Motor (Fan Drive)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Hydraulic Schematic (Hydraulic Fan)
3500E Marine Engines On-Board Replacement Parts
C175-20 Locomotive Engine Injector Solenoid - Test
C7.1 Marine Propulsion Engine Crankcase Breather - Remove
C7.1 Marine Propulsion Engine Crankcase Breather - Install
New Turbochargers are Now Used on Certain 3512C and 3516C Marine Engines {1052, 1053} New Turbochargers are Now Used on Certain 3512C and 3516C Marine Engines {1052, 1053}